Windows 10: Error state

My Canon TS3100 is not communicating with my computer. Says "Error state". What do I do to fix it?

:)

 

"Printer is in Error State"

If your Windows 10 compatible printer’s displaying “Printer in error state” there may be a problem with the printer itself.

So before doing any changes, make sure the printer is properly turned on,connected
to your PC by the cable or Wi-Fi connection.

Also, check it for the low paper or ink and be sure printer’s
cover isn’t open and the paper isn’t jammed.

I have also faced this annoying error a month ago and thankfully making few changes in the Port Settings through Device Manager helped me in this situation. Here's how to fix Printer in Error State:

• First of all, open Device Manager.

• Click on View menu and then choose "Show hidden devices".

• Expand the Ports (COM & LPT) and right click on Printer Port
  then select Properties.

• Now, go to the Port Settings tab and then select “Use any interrupt assigned to the port” option.

• And also check the “Enable legacy Plug and Play detection” box.

• Finally, click on OK button to save the changes and then
  restart your PC.

These changes in Port Settings should fix Printer in Error State in Windows 10 operating system.

Image source: http://www.zerodollartips.com/printer-in-error-state-windows-10/

Article source:

https://support.microsoft.com/en-in/help/4028004/windows-printer-in-error-state

How to Fix Printer in Error State on Windows 10

I hope it helps.

Thanks

 

Error: No work available to process

Hmm. Either it's put out errors and WCG is limiting the work units available, or the project list may not be set to supply other WU when one runs out. (if the problem lies here and not on your end)

On the options to your left, if you go into Results Status, select the computer from Device Name and then look through results see if either they were returned late, errors or any other kind of issue that would stop the servers supplying WU from that perspective.

If there are no errors then it's maybe down to your project list. So selecting Device Manager from the left menu and then clicking on the profile assigned to that computer and make sure that it's assigned to receive WU for other projects if they run out.

At least those steps will rule out problems from the WCG end.

 

Windows Defender error: "Not in correct state" on Windows 10

Hi,

Thank you for posting in Microsoft Community and being part of Windows 10.

Provide us the additional information to assist you better:

• What is the complete error message of this issue?
• When exactly are you facing this issue?

I suggest you to refer to the below thread check if your issue matches with the same.

If so, I recommend you to try the troubleshooting steps mentioned by CJ. Eichholz [MSFT]
on December 12, 2015 and check if it helps.

Can't scan- "Windows Defender is not in the correct state to perform the
required operation"

Hope it helps. Get back to us with an updated status of this issue for further assistance.