Windows 10: error usb

Today when I turned on my PC, when I connect some device through the USB port I get the following error

This device cannot start. (Code 10) If someone has experienced this error please help me

:)

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

ATIFlash 'ERROR 0FL01' FIX

If you have been suffering messages such as 'Adapter not Found' and 'ERROR 0FL01' or even 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsuppor...swItem=MTX-UNITY-I23839&jumpid=reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416/39060a9e/HPUSBFW_BOOTFILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads/1731/ATIFlash 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/...re=&manufacturer=&model=&interface=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------