Windows 10: errorcode 0xc180010B - 0xa001b by using Windows 10 Setup to create USB flash drive

My first thought was to disable Bitdefender, but after doing so the error appeared again.


Nowhere did I find an explanation for this error.


Any help is greatly appreciated.

:)

 

How to create Windows 10 system image on a usb flash drive

Thanks Maria:

I made a system image on a USB flash drive using the tools available in Windows 10. I want to make this image bootable so that I can reinstall it on my computer from the same USB flash drive. Can I do this using the method you have suggested?

If not, can you or anyone else tell me how to do this?

Thanks again,

Regis

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

"You can't install Windows on a USB flash drive using Setup."

Thank you; it worked for me. (Although your suggestion should say from 1 to 0).