Windows 10: Ethernet adapter shuts down when power goes off PC running on UPS

I did asked this question not too long ago and couldnt find a way to edit the post, I received help from other people but EVERYONE is missing the fact this is a PC not a LAPTOP, everyone giving me instructions for laptops. Please help if you have any idea.Trouble:Network adapter shuts down when PC running with UPS batterySo every time there is a power outage i lose internet connection right away, even though I have internet access, my modem is on UPS and my PC is also running fine with its own UPS. Other devices have no internet issues is just this PC.My logic tells me the adapte

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Power surge now Ethernet connection says no IP address

Hello,

As the power surge is a dangerous happening that will surely affect your device as well as the Ethernet, here are the steps we suggest that you do in order to be connected to the internet again:

• Run the Network troubleshooter followed by networking commands.
• Update the network adapter driver.
• If that doesn't work, roll back the network adapter driver.
• Temporarily turn off firewalls.
• Temporarily turn off any antivirus or malware-prevention software.
• Uninstall the network adapter driver and restart.
• Use network reset to reinstall network devices. Note that this step is the last option if the first six steps doesn't really work.

For instructions regarding the above steps, you may refer to this link.

Let us know how it goes.

 

Laptop > Ethernet adapter goes missing

also, I can't even do this step:

Do the same steps for your Ethernet as above for Wi-Fi

as the ethernet adapter is not present - which was the gist of my original post