Windows 10: Ethernet Drivers

Hey all,


so on the 29.01.19 Windows performed an automatic update when I shut down, and the next time I logged in the Ethernet Adapters we're gone / not working.


I have attempted to re-install These, delete them and re-install, attempted a factory reset, Nothing works.


It's ridicullous and starting to piss me off, since no Ethernet Networks (i.e Ethernet0) show upin the Windows power Shell or in Command Prompt. It's as if there is no Ethernet Adapter in the PC, but it exists since i've been consistanly using it for months.

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Constantly disconnecting with ethernet cable

Hello,

Thank you for keeping us posted on the status of the issue.

I suggest you to check if rolling back the Ethernet driver helps to resolve the issue. Follow the below steps.

• First of all, Press Windows logo + R from keyboard. It will open
  RUN.
• Now type devmgmt.msc and press Enter to open Device Manager.
• You will see all the device list of your PC. Expand Network Adapters

Rollback driver

Double click on your Ethernet driver in Device Manager. Then Click on
Driver tab and select Rollback.

Important: If your drive is performing well and there is no error, Rollback driver button will be grayed out as an option.

If it still does not help, I suggest you to reinstall the drivers for the Ethernet driver and check if it helps to resolve the issue.

Note: Once you uninstall the drivers the Ethernet adapter device will be disabled and you won’t be able to connect to internet. So it is advisable to keep all the installer files as a back up in your hard drive.

Write to us with the results for further assistance.

Thank You.

 

Ethernet Driver is not working on Windows 10

Hi,

Thank you for the reply and update.

If you have not yet tried this then I suggest you to follow this step to test if that helps.

Follow these steps.

• 
  Press “Windows key + X” and click on “Device Manager”.
  
• 
  In the list of devices, you should see the Network Adaptor.
  
• 
  Right click on the device and then select "Uninstall".
  
• 
  In the uninstall dialog, make sure you select the option to delete the driver package from the system. This causes the driver package installed earlier to be deleted.
  

In the Action menu of Device manager, select “Scan for Hardware changes” option. This will cause the default device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.

Keep us informed to help you further.