Windows 10: Ethernet Network Cable Unplugged Problem

Laptop = Lenovo IdeaPad S340-15IWL OS = Windows 10Modem = Netmaster Infinity 401USB to Ethernet Adapter = ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter---I plugged my adapter into the SS USB port on my laptop, then connected the adapter with my modem via an ethernet cable.On the network connections page, my Ethernet status is "Network cable unplugged".- I tried to use different ethernet cables 4, didn't work.- I tried all available ethernet ports on the modem 4, didn't work.- I updated the drivers for the adapter, didn't work.- I updated the drivers for USB's, didn't work.- I changed th

:)

 

'Network cable unplugged' on windows 10

Hi,

We would like to clarify the following:

• Can you view your network name SSID (wifi name)?
• Can you also view your neighbors networks?
  
• Do you see a yellow triangle with an exclamation point on your wifi icon?
• What driver did you update? Local area connection (LAN)? Or the built in wifi adaptor.

You are getting error message of ''network cable is unplug'' but it allow you to connect using Ethernet cable. Is the problem about wireless connection?

Looking forward to your reply.

 

"Network cable unplugged" - but it is plugged in..


Hoping some of the Windows ninjas can help.

Running Windows 10 Pro on a Dell XPS 8500 desktop/tower. Hard wired Ethernet from Dlink router to PC.

Had been working great for months. But all of a sudden (yesterday) - getting this message from "Net Connections." Ethernet, network cable unplugged (Realtek PCIe GBE Family Controller). It's strange because it had been working. The PC has WIFI so it's connecting that way.

Here's what I tried so far:

1. Plugged in Ethernet directly from cable modem. Same error.
2. Connected another device to router. It works.

Seems like it's some kind of issue with PC itself - either hardware failure or driver corruption ? Would there be a problem with deleting the Realtek PCIe GBE Family Controller in the Control Panel>Network and Internet > Network Connections - restarting and see if that fixes the issue.

Any other suggestions?

 

network cable unplugged

W10 18363.535 just updated computer #3 today and noticed afterwards while trying to connect to network, I get the "network cable unplugged" message. Did the usual re-plugging, changed the cable, same results. Finally worked over to the network adapter and after a while changed the speed & duplex to 10Mbps and got a connection. Of course this limits my speed to 10Mbps. Other computers on the same either net switch have no problems and all are set to auto negotiate and reach my maximum speed. 95/7. Adapter is standard Realtek Pcle, driver 9.1.410.2015. Appreciate any suggestions.