Windows 10: Ethernet not being detected

Since upgrading my operating system from windows 10 to windows 11, my ethernet cable is not being detected by windows unless I restart the driver every time I boot the computer. I have tried running the trouble-shooter, uninstalling and reinstalling the driver, performing a network reset, trying a different port on my router and even doing a netsh winsock reset. After all this, it can still only be temporarily fixed by disabling and re-enabling the network adaptor. Is there anything else I can do to stop my driver from playing up?

:)

 

Windows 10 after upgade to 1709 if keyboard not plugged then ethernet device is not detected.

When I start my windows 10 (1709 build) without plugging keyboard and mouse, it does not detect Ethernet card.

Mother board is of Intel and Ethernet is on board (integrated).

I have also installed latest Ethernet driver by auto updated drivers from internet.

Steps:

Shutdown pc

Remove keyboard and mouse

Keep lan cable plugged

Start pc

Ethernet device is not detected. It shows in list in Device manager screen. but with Yellow triangle.

Then I need to plug keyboard and just do a hardware scan then Ethernet is detected and all ok after that.

When I start with keyboard and mouse plugged in then it detects Ethernet card and available on LAN.

Am I missing something?

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Cannot connect to ethernet no valid ip configuration

We appreciate the information you've provided. We'd like to confirm the results after following the steps on the link provided on our previous post.

Meanwhile, to isolate your concern, we suggest that you check the following:

• 
  If the Ethernet port is clean.
  
• 
  If the end of RJ45 (Ethernet cord) is still intact.
  
• 
  If available, test the RJ45 (Ethernet cord) to your other device and check if issue persists.
  

We look forward to your reply so we can assist you further.