Windows 10: Ethernet port doesn't light up on motherboard unless adapter is disabled, any fix?

My ethernet port has been working perfectly, right up to yesterday morning when we switched from a Virgin Media router to a Sky routerAs soon as the switch happened my ethernet doesn't work on my PC anymoreThe ethernet cable that goes to my PC still works and provides ethernet to say for example if I connect it to my Sky Home - the ethernet works fine. But for some reason when I connect it to my PC the green/orange light on the ethernet port do not even light up - so it's not a cable/router issueI've tried to update my drivers and reinstall them and flush my IP etc etc, but I've had no success

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

the night light it doesn t turn on

i have problem with the night light it doesn t turn on what am i doing to??

[Moved from: Windows / Windows 10 / Devices & drivers / PC]

 

Windows 10: ethernet adapter problem (HooToo)

Dear Community,

I have a Lenovo Yoga 13, and am using a HooToo HT-UE01 USB Hub / ethernet adapter to connect to the internet through the USB 3 port of the laptop. Since my Windows 10 upgrade, the ethernet capability has stopped functioning properly (the USB ports are fine).
If the laptop ever sleeps and is reactivated, or if the laptop is shut down and rebooted, then the ethernet adapter stops working.

When this happens the ethernet adapter vanishes from the Device Manager. To solve the problem I have to disable the USB port (which, strangely, doesn't disable the devices plugged into that port), then enable it, which makes the ethernet adapter appear in
the Device Manager. Then I have to disable and enable the ethernet adapter, and the problem is solved.

Of course, I do not want to have to do this every time my laptop reactivates, and I had no problem on Windows 8.1.

I have taken the following steps so far with no luck:

• Uninstalled and updated the driver for the HooToo UE01 (Windows 8.1 driver is the most up to date available).
• Uninstalled and reinstalled the driver of the USB 3.0 port from Lenovo.
• Just in case, uninstalled and reinstalled the RealTek wifi adapter drivers from Lenovo, in case there was cross talk.

Kind Regards,

James