Windows 10: Ethernet problem

My Internet package is 30 Mbps. I can get up-to 29.6 Mbps with my WiFi adapter but in LAN cable can't get more than 10 Mbps. It's like a limit that a can't cross 10 Mbps. How can I solve this?

I'm using

• Cat-6 Cable.
• Tplink Tl wn840n router

https://preview.redd.it/yzljczfvmsa...bp&s=7d97ddd97e6016cc5487e4257c51c215dae87d7e

• Gigabyte 78lmt-usb3 (rev. 6.0)- Motherboard

submitted by /u/Waste-Ad-6500
[link] [comments]

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Cannot connect to ethernet no valid ip configuration

We appreciate the information you've provided. We'd like to confirm the results after following the steps on the link provided on our previous post.

Meanwhile, to isolate your concern, we suggest that you check the following:

• 
  If the Ethernet port is clean.
  
• 
  If the end of RJ45 (Ethernet cord) is still intact.
  
• 
  If available, test the RJ45 (Ethernet cord) to your other device and check if issue persists.
  

We look forward to your reply so we can assist you further.

 

Ethernet controllers problems

thats what i have been doing is going to the device mgr and clicking the the let me choose. but it always says "windows can not install your ethernet controller. And there the Ethernet Controller isnt in the list..im going to be working on this all night. I just got back from work.