Windows 10: Event 55 Kernel-Processor-Power Microsoft-Windows-Kernel-Processor-Power - Stuttering/Lag...

I have been dealing this issue for quite some time. I'm not sure if it is a network/isp, hardware, or a software problem. Can anyone tell me why I am getting these events?Event 55 47: Kernel-Processor-Power"Processor 5 in group 0 exposes the following power management capabilities:Idle state type: ACPI Idle C States 2 statesPerformance state type: ACPI Collaborative Processor Performance ControlNominal Frequency MHz: 3701Maximum performance&

:)

 

Kernel Processor Reduced (Warning) - Event ID 37

Hello Kadesh,

Thank you for posting your query on Microsoft Community.

As per the issue description you are facing issue with Kernel Processor. I would suggest you to try the steps provided in the threads below and see if it helps you to fix the issue.

Kernel-Processor-Power Event
ID 37 even after Clean Boot

Event 37, Kernel-Processor-Power for all 8 Processors


Note: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the
configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.


Hope this would help. If issue still persists post back with current status of your computer and result of the proposed suggestion, we will be happy to assist you.

Regards,

 

Event 55 Kernel Processor Power

My hard drive is powering off after 20 minutes of playing any game and I'm not sure why; I checked my power settings and my hard drive is set to never shut off. Any ideas?

• Operating System: Windows 10 Home
  
• CPU: AMD RYZEN 9 5950X 3.40 GHz (4.90 GHz Max Boost), 16-Core 32-Thread
  
• GPU: GeForce RTX 3080TI 12GB (Brand May Vary)
  
• Motherboard: ASUS TUF X570 Gaming Plus WIFI ATX Motherboard
  
• RAM: G.Skill TridentZ RGB 32GB DDR4 3200MHz (2x16GB)
  
• SSD: 1TB Gigabyte AORUS Gen4 M.2 NVMe SSD
  
• CPU Cooler: RGB AIO 240MM Liquid Cooler (Brand May Vary)
  
• PSU: 850W 80 Plus Gold Fully Modular (Brand May Vary)
  
• Case: Rosewill SPECTRA D100 ATX Mid Tower With Tempered Glass Case
  
• WiFi: Yes
  
• Bluetooth: Yes
  

Processor 30 in group 0 exposes the following power management capabilities:

Idle state type: ACPI Idle (C) States (2 state(s))

Performance state type: ACPI Collaborative Processor Performance Control

Nominal Frequency (MHz): 3394

Maximum performance percentage: 176

Minimum performance percentage: 51

Minimum throttle percentage: 17

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0f67e49f-fe51-4e9f-b490-6f2948cc6027}" />

<EventID>55</EventID>

<Version>0</Version>

<Level>4</Level>

<Task>47</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000000</Keywords>

<TimeCreated SystemTime="2022-01-31T09:53:16.1065947Z" />

<EventRecordID>21280</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="644" />

<Channel>System</Channel>

<Computer>DESKTOP-BICFE47</Computer>

<Security UserID="S-1-5-18" />

</System>

- <EventData>

<Data Name="Group">0</Data>

<Data Name="Number">30</Data>

<Data Name="IdleStateCount">2</Data>

<Data Name="IdleImplementation">1</Data>

<Data Name="NominalFrequency">3394</Data>

<Data Name="MaximumPerformancePercent">176</Data>

<Data Name="MinimumPerformancePercent">51</Data>

<Data Name="MinimumThrottlePercent">17</Data>

<Data Name="PerformanceImplementation">3</Data>

</EventData>

</Event>

 

restart and kernel-power event

Hi,



The kernel power event ID 41 error occurs when the computer is shut down, or it restarts unexpectedly. When a computer that is running Windows starts, a check is performed to determine whether the computer was shut down cleanly. If the computer was not shut
down cleanly, a Kernel Power Event 41 message is generated.



Try this, see if it works for you:

• Go to "Settings"
• Select "System"
• Select "Power and Sleep"
• Select "Additional Power Settings"
• Select "Choose what the power buttons do"
• Select "Change settings currently available"
• Ensure that "Turn on fast start up" is deselected (unticked)
• Click on "Save Changes"

Restart your computer after performing the steps.



Let us know if the above steps resolved the issue.