Windows 10: Every time i boot up my PC cmd is using too much ram

When i open Task Manager to check ram usage i see that cmd is using about 2gb of my ram. When i close it and restart my PC program starts again by itself.

:)

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

How to boot from windows.old in CMD?

Hi. Ok, one step at a time.

Unfortunately I can t access WinPE. I indeed have advanced options, but all of them are only CMD and troubleshoot.

The method for turning on and off PC didn t work for me.

Nor the CMD method regarding WinPE automatic start. CMD said shutdown is not recoknized as an...something like that. Tried to upload the pic, but I can t, don t know why.

What I forgot to mebtion is that my CMD is weird and sometimea do not recognise commands. I did all the bootrec commands except the last one successfully. Unfortunately, the last one command was not recognised. Nothing changed.

I now did bootrec /rebuildpc and found 2 windows installations. I added them both to boot list, but have to boot them?

Best regards, Greg

 

Time Change with cmd

Hello Hasan,

Thank you for posting in Microsoft Community.

I understand that you are trying to change the time. We will help you.

In the Date and Time Settings dialog box, do one or more of the following:

• 
  To change the hour, double-click the hour, and then click the arrows to increase or decrease the value.
  

• 
  To change the minutes, double-click the minutes, and then click the arrows to increase or decrease the value.
  
• 
  To change the seconds, double-click the seconds, and then click the arrows to increase or decrease the value.
  

• 
  When you have finished changing the time settings, click OK.
  
• 
  To change the time zone, click Change time zone.
  
• 
  In the Time Zone Settings dialog box, click your current time zone in the drop-down list, and then click
  OK.
  

Also I suggest you to check the below steps to change the time using the command prompt.

• Right click on Start and select the
  Command prompt (Admin).
• Type the word "time". Type a space, and enter the new time in the following format:
  
• HH:MM:SS AM/PM. For example, time 5:34:00 PM, time 12:15:00 AM, etc.
• Press enter or return.

Hope it helps. Keep us posted to help you better.