Windows 10: Exernal DVD Drive Not recognized anymore

I plugged an external USB DVD drive into my Windows 11 Pro computer. The drive worked fine - however the mouse became very erratic while the external DVD drive was plugged in - making the entire computer very difficult to operate typical Windows behavior. So, I yanked the USB chord out without officially ejecting the device. I found a different USB slot on my computer and plugged the DVD drive into that port - in the hopes that both the DVD drive and mouse would work at the same time. I suppose the expectations are far too high. Unfortunately, Windows now believes the device is fault

:)

 

CD/DVD drive not recognized

---I'm okay with opening latops. I've opened this one 3 times, adding SSD HD and upgrading RAM. I'll be able to try this later on, Friday, probably. With it spinning up when a CD is inserted, I'm not sure this would help. I'd appreciate advice on this.

 

CD/DVD drive not recognized

First, try inserting a disc in the drive, does it spin up?
Sometimes, it takes media in the device to be recognized, rare for an optical drive though.

A few other suggestions

• Try uninstalling the device in Dev mgr, wait 2 or 3 minutes and if Windows doesn't cycle though hardware changes, right click any device and select Scan for Hardware changes.
  
  
• You might also want to check File and Folder options in File Explorer
  press the blue file menu,
  select Change folder and Serach options
  select the View tab
  is show empty drives selected?
  
  
• It would help members if you could post a screen shot of Dev mgr device properties (post the first 4 tabs)
  If it is an unknown device -post the General tab and the Details.
  On the Details tab, select Hardware IDs from the drop down box
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

I'm not sure if these suggestions will help. I had a similar issue with a CD drive on a Vista box, turned out to be a hardware issue on the Mobo. The optical drive is really controlled by a few settings (DVD, CD, Writer) and when it doesn't work, it is hard to diagnose.

If the device worked before (recently), it's a Win10 issue, and it might be version specific. There are known issues with AMD graphics drivers, this might extend to the chipset as well - those with Intel boards / CPUs can ignore this part. It's a guess anyway.

If you're comfortable with hardware, you might try removing the optical drive from the box, restarting without it attached, and then shut down, reinstall the optical drive and start up the machine.

Follow instructions in the service manual for your device or on the mfr website.

 

Dvd drive not showing

Is this the HP 15r014tx in your system specs? If so, try the steps in this thread....
https://h30434.www3.hp.com/t5/Notebo...r/td-p/6186456

It may be that your DVD drive has a hardware failure (as was suggested in that thread).

More HP support and diagnosis suggestions here in their Help pages....

https://support.hp.com/us-en/document/c03370738