Windows 10: EXTENDED SCREEN ISSUES

I have a Samsung Galaxybook flex 2 which I have connected via hdmi to my samsung UHD monitor. When I simply mirror the display or display screen 2, it does not fill the whole of the screen. When I chose to extend the screens, it fills the screen but I lose the icons/shortcuts on the second screen. This is made worse by the fact that when I try to open programs this happens on the main laptop screen but not the 2nd? Have trued both hdmi and usbc connections but the same happens. Can someone help me.

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

How to extend C partition

Hi Kevin,

Thank you for the information provided.

Please to inform you that you need to have an “unallocated disk space” to the right of the Partition\Volume you wish to extend on the same drive. Only when “unallocated disk space” is available “extend” option is highlighted.

I suggest you to try these steps and check if they helps.

Step1: Press Windows + R and Diskmgmt.msc and try the following

a. Right click the basic volume want to extend.

b. Click extend volume.

c. Follow the instruction on the screen.

Step2: Open a command prompt and type diskpart.

At the DISKPART prompt, type list volume. Make note of the basic volume you want to extend.

At the DISKPART prompt, type select volume <volumenumber>. This selects the basic volume volumenumber that you want to extend into contiguous, empty space on the same disk.

At the DISKPART prompt, type extend [size=<size>]. This extends the selected volume by size megabytes (MB).

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.