Windows 10: External SSD not detecting in the boot menu

External SSD not getting recognized in the boot menu by Windows 11 laptop I recently purchased a gaming laptop, Lenovo IdeaPad Gaming 3 15ACH6 for programming and running Linux.I had previously setup an internal SSD with a case with ubuntu and wanted to use it with this device. But it is not getting recognized in the boot menu.The laptop came pre-installed with Win11. The external SSD is from GigaByte and is working fine when viewed from another laptop and from live ubuntu. I have tried updating the boot version.What can I do? Could it be the problem with Win 11 because the ot

:)

 

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's bios menu.

Hi Matthew,

There are several possible reasons as to why your computer is not detecting an SSD drive. This could be caused by incorrect BIOS settings or device drivers that need to be updated. Since you already tried the suggestion of Andre Da Costa and this allowed
your computer to detect the SSD already, we would like to further clarify your concern by asking the questions below:

• If you were already able to install Windows on the SSD, have you already attempted to change the boot order in the BIOS menu?
• Which version of Windows did you install on the SSD?
• What other troubleshooting steps have you attempted?

We look forward to your response to our queries.

 

Boot menu question

Hey guys I'm trying to run windows repair on my computer by booting my computer from the vista CD, problem is the boot menu doesn't detect my USB keyboard. Are there any options in bios that will make the mobo detect my keyboard in boot menu? I don't have an analog keyboard on hand so this problem is quite annoying. *Bang Head :banghead:

 

No startup boot menu

Hello Kimoefat,

Thank you for posting your concern in Microsoft Community and welcome to the Windows 10 Family.

As an initial recommendation, I would suggest you to access the System configuration utility and check if the Operating System installation path for Ubuntu exists. To do so, follow the below steps.

• Type msconfig in the search bar and select System Configuration from the search results.
• Select the boot tab in the System configuration console to check if the installation path for Ubuntu exists.

If it exists, next logical step is to check if the boot menu time out has been set to 0, which results in Boot menu not showing up.

The boot menu time-out determines how long the boot menu is displayed before the default boot entry is loaded. It is calibrated in seconds. To change the boot menu time-out, use the Bootcfg
/timeout switch. Valid values are from 0 through 999. You cannot use Bootcfg to set an indefinite time-out.

You can run the following Run command line to set the boot menu time-out accordingly. To do so, follow the below steps.

• 
  Press Windows key + X, select
  Command prompt (Admin) to bring up elevated Command prompt
  
• 
  Type in the following command: bootcfg /timeout 10
  
  timeout 10 will set the time frame to 10 seconds
  

However, if the Boot path for Ubuntu does not exist in the boot menu of System Configuration utility, I would suggest you to check if the Ubuntu is overridden by the Windows installation or if the Ubuntu installation files are corrupted.

Hope the above information is helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You.