Windows 10: Fail to telnet after open port 5501

Discus and support Fail to telnet after open port 5501 in Windows 10 Network and Sharing to solve the problem; Hi, I open port 5501 in firewall (Inbound Rules) and try to telnet locally to the port. It show connect failed. Anything else should I consider in... Discussion in 'Windows 10 Network and Sharing' started by Felix Chew Kok Chee, Aug 26, 2018.

  1. FELIX CHEW KOK CHEE
    Felix Chew Kok Chee Win User

    Fail to telnet after open port 5501


    Hi,


    I open port 5501 in firewall (Inbound Rules) and try to telnet locally to the port. It show connect failed.

    Anything else should I consider in order to allowed port to enable?

    Meanwhile I use netstat -na to check port open (listening) in my Laptop, the result not show in the TCP listening, why?


    Thank you.

    Felix


    Moved from: Windows 10 / Security & privacy

    :)
     
    Felix Chew Kok Chee, Aug 26, 2018
    #1
  2. SANWENNPICSON
    SanwennPicson Win User

    Telnet

    C:\Users\administrator.MISD>telnet 192.168.19.5 8194

    Connecting To 192.168.19.5...Could not open connection to the host, on port 8194

    : Connect failed

    How can I resolve this problem
     
    SanwennPicson, Aug 26, 2018
    #2
  3. IGGSTER
    IggSter Win User
    How to factory reset Cisco 1700 Router

    Hopefully I can help you here....its a very common thing to happen.


    First, I take it you dont know the passwords for console access or telnet/ssh?

    I will assume that these devices belong to you.

    step 1. Plug a cisco console cable into a serial port on your pc
    step 2. Plug other end into Cisco console port
    step 3. Using hyperterm or putty or similar connect to the serial port
    step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
    step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
    step 6. now you have to do the only hard part...send the break command:

    Break command list: Break Commands

    Go down the list and match your OS and SW and try the sequence suggested.

    If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".
     
    IggSter, Aug 26, 2018
    #3
  4. DENNIS MOP
    Dennis Mop Win User

    Fail to telnet after open port 5501

    usb port reset fail

    Hi Laura,

    We would like to know more information regarding the "usb port reset fail" error that you are getting. To verify whether this issue is being caused by the port or the external device, we would like to gather more information:

    • What external device are you trying to connect to your computer?
    • Have you tried connecting the external device to another port or different computer?
    • Have you tried connecting a different external device to the port?
    • What troubleshooting steps have you tried so far?

    Regards.
     
    Dennis Mop, Aug 26, 2018
    #4
Thema:

Fail to telnet after open port 5501

Loading...

  1. Fail to telnet after open port 5501 - Similar Threads - Fail telnet open

  2. Firewall Port Open - Connection Failed on Telnet

    in Windows 10 Gaming
    Firewall Port Open - Connection Failed on Telnet: We have a server that workstations are needing to connect to using port 9091. The server's windows firewall port 9091 inbound is open but the server does not show it as listening. When attempting to telnet to the server from the workstations on port 9091, we get a connection...

  3. Firewall Port Open - Connection Failed on Telnet

    in Windows 10 Software and Apps
    Firewall Port Open - Connection Failed on Telnet: We have a server that workstations are needing to connect to using port 9091. The server's windows firewall port 9091 inbound is open but the server does not show it as listening. When attempting to telnet to the server from the workstations on port 9091, we get a connection...

  4. Telnet works fine but telnet lib does not.

    in Windows 10 Gaming
    Telnet works fine but telnet lib does not.: I created a virtual router with gns3. I can connect it well with the telnet. It however fails when trying to use the exetnsion for pyhton, telnetlib....

  5. Telnet works fine but telnet lib does not.

    in Windows 10 Software and Apps
    Telnet works fine but telnet lib does not.: I created a virtual router with gns3. I can connect it well with the telnet. It however fails when trying to use the exetnsion for pyhton, telnetlib....

  6. Could not open connection to the host, on port 23: Connect failed - Telnet

    in Windows 10 Network and Sharing
    Could not open connection to the host, on port 23: Connect failed - Telnet: I'm using Windows, I really need help because I cannot to port 23, all possible way to open the port 23, I still got the same. 1. Even I install the Telnet Client from prog. and features 2. Turn off all anti-virus/malware etc 3. Turn off Firewall 4. I already added port...

  7. Failing to connect to a Telnet host on port 23 via a VPN only when going through router.

    in Windows 10 Network and Sharing
    Failing to connect to a Telnet host on port 23 via a VPN only when going through router.: I've been going crazy trying to narrow down this issue. So to start, I am trying to connect to a remote server for work. This connection is using a telnet client program on my pcs. One is Windows 10, the other, Windows 7. Both also have a vpn client installed and I am...

  8. Windows 10 IOT Core , telnet on 8081 Could not open connection to the host, on port 8081:...

    in Windows 10 Network and Sharing
    Windows 10 IOT Core , telnet on 8081 Could not open connection to the host, on port 8081:...: I am trying to telnet 8081 to iMX6 board having windows 10 IOT Core installed, but i am getting the error "Could not open connection to the host, on port 8081: connect failed" When i ping to the iMX6 machine i get a reply, my question is that , is IOT core has specific...

  9. Fail to telnet after open port 5501

    in AntiVirus, Firewalls and System Security
    Fail to telnet after open port 5501: Hi, I open port 5501 in firewall (Inbound Rules) and try to telnet locally to the port. It show connect failed. Anything else should I consider in order to allowed port to enable? Meanwhile I use netstat -na to check port open (listening) in my Laptop, the result not show...

  10. Telnet

    in Windows 10 Network and Sharing
    Telnet: Hi All, I just signed up and this is my first post. My question is: since there is no telnet server in Windows 10 that would be the reason I can not Telnet in from my Centos VM Correct? I can Telnet into my CentosVM from my Windows VM but not vice versa, Thank You in...