Windows 10: Failing to get laptop to serve time and date to device

I would like the laptop to serve time and date from the CMOS clock to a Linear Telephone Entry device. This is a local network, no Internet.


Here are the laptop and device configurations:


Laptop static IP address = 192.168.0.149 running Windows 10 Home Version 1903



Linux device static IP address = 192.168.0.250, Subnet Mask 255.255.255.0, Gateway 192.168.0.1, DNS Server 1 192.168.0.250

also tried 192.168.0.149



Laptop communicates with device using web interface over Ethernet patch cable



Device configured for NTP Server Synchronization, Server Address 192.168.0.149



Laptop does not supply date & time to device 11-Nov-2019 after power applied to device



Laptop can ping device:

C:\Users\User>ping 192.168.0.250



Pinging 192.168.0.250 with 32 bytes of data:

Reply from 192.168.0.250: bytes=32 time=1ms TTL=64

Reply from 192.168.0.250: bytes=32 time=1ms TTL=64

Reply from 192.168.0.250: bytes=32 time=1ms TTL=64

Reply from 192.168.0.250: bytes=32 time=1ms TTL=64



Ping statistics for 192.168.0.250:

Packets: Sent = 4, Received = 4, Lost = 0 0% loss,

Approximate round trip times in milli-seconds:

Minimum = 1ms, Maximum = 1ms, Average = 1ms


Have attempted to set up laptop as NTP sever by starting time service and making a registry edit:


C:\WINDOWS\system32>w32tm /query /configuration

[Configuration]


EventLogFlags: 2 Local

AnnounceFlags: 10 Local

TimeJumpAuditOffset: 28800 Local

MinPollInterval: 10 Local

MaxPollInterval: 15 Local

MaxNegPhaseCorrection: 54000 Local

MaxPosPhaseCorrection: 54000 Local

MaxAllowedPhaseOffset: 1 Local



FrequencyCorrectRate: 4 Local

PollAdjustFactor: 5 Local

LargePhaseOffset: 50000000 Local

SpikeWatchPeriod: 900 Local

LocalClockDispersion: 10 Local

HoldPeriod: 5 Local

PhaseCorrectRate: 1 Local

UpdateInterval: 360000 Local





[TimeProviders]



NtpClient Local

DllName: C:\WINDOWS\SYSTEM32\w32time.DLL Local

Enabled: 1 Local

InputProvider: 1 Local

AllowNonstandardModeCombinations: 1 Local

ResolvePeerBackoffMinutes: 15 Local

ResolvePeerBackoffMaxTimes: 7 Local

CompatibilityFlags: 2147483648 Local

EventLogFlags: 1 Local

LargeSampleSkew: 3 Local

SpecialPollInterval: 32768 Local

Type: NoSync Local



NtpServer Local

DllName: C:\WINDOWS\SYSTEM32\w32time.DLL Local

Enabled: 1 Local

InputProvider: 0 Local

AllowNonstandardModeCombinations: 1 Local


Any help would be much appreciated. My coordinates:


Best regards, Roger Nathan <*** Email address is removed for privacy ***>

65-14877 33 Ave, Surrey, BC V4P 3A3

Tel. 604-385-3242

:)

 

a request for device descriptor request failed

Maybe it's time to step back from the current efforts, and start over. I suggest you read over this excellent tutorial and try all of its steps: [Solved] Unknown USB Device (Device Descriptor Request Failed) for Windows 10 - Driver Easy. The one that may provide you with some easy relief is the one where you uninstall the device whose descriptor is failing, reboot, and see what happens when device enumeration recurs during boot-up. If you're lucky, it will fix itself.
HTH,
--Ed--

 

Date and Time

Hi Roman,

Thank you for posting your query on Microsoft Community.

I understand your inconvenience. We will assist you with it.

I suggest you to change the Date and Time format from Control Panel and check. Also select the time zone as UTC-5.00 Eastern Time.


After changing the setting, I suggest you to set “Windows Time” service as automatic. Follow the steps provided below.

• Press Windows logo Key + R key.
• Type services.msc
• Right click on Windows Time service.
• Select Properties.
• Under startup type drop down, change it to Automatic.
• Click on Apply button and OK button.

Restart your computer and check.

Hope this information is helpful. For any further query, feel free to contact us.

Thank you.

 

Date and Time Year is 3015 and can't change to 2015.

Hi Anthony,

Thank you for posting your query on Microsoft Community.

I understand your inconvenience. We will assist you to resolve this issue.

I suggest you to set “Windows Time” service as manual. Follow the steps provided below.

• Press Windows logo Key + R key.
• Type services.msc
• Right click on Windows Time service.
• Select Properties.
• Under startup type drop down, change it to manual.
• Click on Apply button and OK button.

Restart your computer and try to change the date and time and check.

To change the date and time, follow the steps provided below.

• Go to Date and time settings.
• First, turn of the set time automatic.
• Then Click on Change button, under Change date and time.
• Now set the date and time, and then restart the computer and check.

Hope this information is helpful. For any further query, feel free to contact us.

Thank you.