Windows 10: Fast Startup Preventing my PC from booting

So i decided to disable fast startup on Windows 10 to save energy, but since i did, i started having problems when booting.

when i try to turn on my computer it enters like an iddle state, all the fans and rgb lighting turns on, but it doesn't post or shows any sing of booting.

I found a workaround to get the pc off that iddle state, it appears that my keyboard and mouse stop being defected from my motherboard USB ports so i conect the keyboard to my CPU tower port and only then the pc boots.


It may have something to be with the power states, but i don't know much about that.

:)

 

Fast Startup not working but hibernate is working.

Hello Anubhav,

Thank you for posting in Microsoft Community.

I understand that the fast startup is not working after the check disk in your PC. We will help you.

To assist you better, I suggest you to answer the below questions.

• What issue were you facing to perform the check disk?
• Are you getting any error messages?
• What is the make and model of your PC?
• Which Edition of Windows 10 are you using?

I suggest you to follow the below steps and check if it helps.

Using Group Policy Editor:

Note: This option for using group policy is only available in the Windows 10 Pro editions.

• Press Windows Key + R combination and put gpedit.msc in
  Run dialog box.
• In the left pane navigate to:

• Now look in the right pane, you’ll got the policy named Require use of fast startup as shown above.
• Double click on this policy to get the window shown below.
• Now you can use following settings:
• Force “Hybrid boot” to be always turned on = Enable
• Do NOT force “Hybrid boot” to be always turned on = Disabled/Not configured
  (Default Setting)
• After making changes click Apply followed by OK.

Restart the machine and check if it helps. Keep us posted to help you better.

 

Windows 10 Fast Startup Boot Fail

Since about the update to W10 V1607 a Fast Startup enabled boot stalls. The four window panes appear but the circle of dots chasing it's tail do not. Prior to V1607 Fast Startup was working. Update KB3194798 failed, but was subsequently successful. A "sfc
/scannow" didn't turn up any problems, and its to early for a boot log. Any suggestions for tracking down this annoying little problem?

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.