Windows 10: Fh4 Error Code E:4f-0

Hallo ich hatte ganz normal Forza Horizon gestartet und dann aufeinmal kam diese Fehlermeldung mit dem Code E:4f-0 und konnte das Game seitdem nicht mehr spielen. Auf der Konsole geht es nicht und auf Pc hab ich es versucht neu zu Installieren was nicht geht da das Spiel beim Download Fehler aufweist und so kann ich das nicht mehr Starten bzw Installieren

:)

 

Asus Debug code 4F or really sticks on 78

4f is DXE-IPL(one of the last steps in initialization of the uefi firmware) and 78 is chip-set
could be anything from the cpu over-tight/or not tight enough
or the board on its way out
I would start by re-seating the cpu (inspect the pins while you are at it )
if the problem is intermittent it could be the board is just faulty
I doubt its related to the power draw from the fans those usually don't cause any type of error code
edit:further research tells me you may have a board on the fritz
If you are using LUICD MVP disable it in the bios also ensure the bios is the latest version

 

Intel Updates Core 2 Quad Q9550 to E-0 Stepping

We continue our Monday news list with another Intel story that brings to our attention information concerning the company and more specificly its 2.83GHz Core 2 Quad Q9550 chips that will move from the current C-1 to the newer E-0 stepping. The updated chips will start selling on August 22nd, featuring the following changes:

• New SSpec and MM numbers for the converting products
• CPUID will change from 0x10677 to 0x1067A
• Package change to Halide free package

Apart from that, the new stepping CPUs will not include any other changes. Of course, like most new stepping parts a BIOS update will be needed.


Product Change Notification 108663 - 00

Source: TechConnect Magazine

 

Intel Core 2 Duo E8400/E8500 and Xeon E3110 Moving to E-0 Stepping Next Month

After moving all 45nm Xeon DP quad core processors from the C-O to the E-0 stepping, Intel announced today that three more 45nm processors will also be upgraded to E-0. The two desktop Core 2 Duo E8400 and E8500 plus the server Xeon E3110 CPUs will all be updated to the E-0 stepping next month. Changes that will come with the E-0 stepping include:

• 
  - CPUID will change from 0x10676 to 0x1067A
  - Power Status Indicator (PSI) is supported
  - PECI implementation change
  - New instructions added - XSAVE/XRSTOR
  - New ISA extension for save/restoring context of x87, SSE, and future processor state
  - New feature added - ACNT2
  - Improved mechanism for determining processor utilization. To be used for more efficient P-state determination.
  - Package change to Halide free package

The E-0 processors will not require any BIOS updates. They'll be easily recognisable by the new sSpec numbers: SLB9J for E8400, SLB9K for E8500 and SLB9C for E3110.

Source: TechConnect Magazine, HARDSPELL