Windows 10: Finding USB drive

I just bought a new computer

I plugged a flash drive in and it is not showing. only One Drive shows when I go to File explorer. Why is it not showing? I need to transfer my files.

:)

 

help. USB drive isn't assigned a drive letter.

Any usb flash drive I plug into my computer isn't assigned a drive letter. The physical drive shows in the "safely remove hardware" but it doesnt show up in disk management. I have tried to populate the volume thru the safely remove hardware properties window and it does pop up in the list but it doesn't stay there. This isn't a format or assign a letter problem. It's more complicated then that. Maybe one of the services needed for usb drive management was disabled? Suggestions needed. btw external usb harddrives work fine.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Unable to use System restore from a windows 10 image on Windows 7 with error: "windows cannot find a system image-the usb drive is not visible"

Hi Otley,

Thanks for replying to us with the status of your issue.

As you mentioned, when you connect the USB flash drive in to the system then the System image backup is not present. It might occur if the System image files is not created properly or may be it got corrupted.

As an initial steps I suggest you to check for the memory space in the USB flash driver.

If the Memory is occupied in the USB flash drive the I suggest you to try running check disk on USB flash drive and check if it helps.

Follow the below steps to perform Check Disk.

• 
  Press Windows + X on your keyboard.
  
• 
  Select Command Prompt (Admin).
  
• 
  Type the below commands.
  
  Chkdsk [drive letter]: /f /r
  

Reply to us with the status of your issue, we will be happy to assist you.