Windows 10: First time PC owner need help getting multiple BSOD stop codes at various times

Updating drivers caused blue screen please helpMy pc is about 6 months old. I had it prebuilt at micro center and have not had any issues until I went to update my gpu drivers to play baldurs gate 3 I experienced my first BSOD on this pc. Follow this the computer began to crash multiple times with various stop codes. After this I booted into safe mode to try and reset the computer because I thought it may have been corrupted, however upon trying this the computer would fail to reset the pc, or blue screen again. After about 6 hours of this and googling fixes I ran sfc /scan now as well as a di

:)

 

Various BSOD Errors Help

Hey all,

I've received multiple BSOD errors the past 2 days after rebuilding my PC. I've been trying to figure out the issue.

These are the few BSOD messages I remember seeing:

• DPC_WATCHDOG_VIOLATION (multiple times)
• CRITICAL_PROCESS_DIED (one time)
• IRQL_NOT_LESS_OR_EQUAL (one time)
• WHEA_UNCORRECTABLE_ERROR (multiple times)

Here's a link to the dmp files and system information: OneDrive

Steps I've taken:

• fully updated drivers
• applied all Windows updates
• Removed unnecessary hardware
• Monitored CPU/GPU temps (log file on temps during last crash in share)

Any help would be appreciated.

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar:
   
   
   
   

 

Various BSODs/crashes at random times

I'm getting varying bluescreens and sometimes even crashes at random times. When these crashes occur, my screen just goes black and Windows starts normally as if nothing had happened, without leaving a dump file, whereas the bluescreens always leave one behind.
The most common BSODs are UNEXPECTED_KERNEL_MODE_TRAP and IRQL_NOT_LESS_OR_EQUAL, but I've had different ones appear in the past.
I've been having these issues with my PC ever since I built it 9 months ago.
I have tried solving this many different times, but I never managed to get this PC working properly. I have already gone through following troubleshooting steps:

• Tested my CPU with stress tests and Intel's "Processor Diagnostic Tool". PC crashed a few times so I replaced the CPU.
• Stress tested the GPU (monitored temps, always below 80C at full load)
• Tested both RAM sticks, separately and together, for 12 hours each with memtest86 (no errors)
• Replaced the motherboard
• Replaced the power supply
• Removed all components apart from the essentials (CPU, MB, RAM, GPU, PSU, SSD)
• Fully formatted all drives and reinstalled Win10 multiple times.
• Ran Driver Verifier on a fresh install with only Microsoft drivers selected. This led to my PC locking up and not starting. Whenever it booted up after that, DRIVER_VERIFIER_DETECTED_VIOLATION popped up and afterwards it said "Windows couldn't load correctly". The only way to get the PC working again from that point was to do a system restore. (I did this multiple times, it yielded the same result every time)

After all these attempts my PC is still crashing regularly and I'm out of things to try. I don't plan on replacing any more parts myself, and the place where I bought all the components isn't answering my RMA requests.
I have attached the DM log and a screenshot of my specs. Any help would be greatly appreciated.