Windows 10: Fix Chassis Intruded … Fatal Error … System Halted

If you receive an error message saying Chassis Intruded, Fatal Error … System Halted on the monitor; it means that the Chasis or the cabinet which holds the motherboard, CPU, GPU, etc. is open. It’s a security feature offered by some [...]

This post Fix Chassis Intruded … Fatal Error … System Halted is from TheWindowsClub.com.

read more...

 

Chassis intruded - Fatal error - System halted

I've got this old socket 478 system sitting around it has the error Chassis intruded - Fatal error - System halted i've tryed the jumper no help, i've reset the cmos that didnt work, is the board dead? the board is a Asus P4P800.

 

Chassis intruded - Fatal error - System halted

their should be....their should also be a jumber on the board for chassis intrusion just put it on off...go into the bios if you can and deisable it...if you cant get into the bios because of the hault then clear the cmos after you you set the intrusion jumper to off/disabled or w/e just look in the manual.


EDIT: i did some searching for you...the board isnt dead but apparently this was a huge problem for alot of P4 asus mobo's. Next to your CMOS battery their should be a jumper....look for one that says something like "Chassis" or "Intrusion" or "Detect" if their is no jumper on the pins put one their and clear the cmos. these are the pins that need to be shorted


1 space 3 4

|_||

you want to put one here
...._
|_||

on the mobo it should look like this

...._
|_||
O
CMOS BATT.

 

Fatal Error

I've been trying to format my system but right after it finishes formatting I get a Fatal Error during the Windows installation process. That Fatal Error is a Data Error (cyclic redundancy check). I know that it's because of my hard drives, but how do I fix this issue? I have 2 Seagate Barracuda 7200.10 250GB SATA II Hard Drives in RAID 0. Any help and suggestions would be greatly appreciated. *Smile