Windows 10: Fixing BSOD with installation media USB

My Windows 10 PC has been BSOD critical process died since the 11th, I’ve worked my way through what seems to be every solution available. I’m now working through using the Media Creation Tool to troubleshoot my PC.I’ve been advised to boot up the Windows 10 USB, select ‘Repair this Computer’ and try each option within the Recovery Environment to see if anything will fix it.Startup Repair still can’t fix the PC and I don’t have a System Restore point, which only really leaves me with trying Command Prompts I’ve not touched the UEFI Firmware Settings and System Image Recovery as I’m not know

:)

 

Installation media boots to command prompt

I've just booted from known working install media to see exactly what it does when booting. The sequence of events is...

1. Windows logo on a black screen
2. circling dots appear beneath the logo
3. light blue 'Please wait' screen with circling dots
4. a command prompt window (very briefly)
5. the initial Setup page appears

Do you see steps 1-3? If so, it appears you have stopped at step 4, suggesting that something on the disc cannot be read.

Does the disc boot properly in another machine? If so, try cleaning the laptop's drive lens then try booting from the disc again.

If not, make new install media with Microsoft's Media Creation Tool, either as a bootable USB, on an ISO that you can burn to another disc. At Step 8 in Option One of this tutorial you can choose between making a USB or an ISO.

Download Windows 10 ISO File

 

BSOD on install from USB

Have an HP Notebook 14-cf0013dx, 8gb ram, 1TB HDD 5200rpm (full specs are in profile)

Attempting to reinstall windows after BSOD on start, mostly page fault in non paged area BSOD error but can also be irql not less or equal, or Kernel Secure check failure. Saw another one or two but cannot recall at the moment.

Symptoms. Can boot to USB in UEFI or legacy and Load the windows 10 install made from the windows creation tool. The loading files completes. The system restarts and the HP splash screen appears with the windows 10 dots circling underneath for about 2 revolutions then a BSOD.

First steps:
Tried windows 10 recovery. over 48 hours still not completed.
Ran HP hardware diagnostics, Memory HDD, system board all passed.
Ran memtest86 from Hirens Boot CD. passed.
Ran seagate HDD test. passed.
Tried windows 10 USB install after each step above.
Tried Windows 10 safe mode installation, was able to get through installation but on reboot the same results, BSOD within 3 revolutions of startup dot-circle.

Second steps:
Removed HDD, hooked up to main computer and did a CMD, DISKPART, CLEAN
Updated BIOS to most recent version F.53 to support windows 10 v.1909
Moved DIMM from slot 1 to slot 2
Tried HP cloud recovery with exact same results as listed above.
Tried Windows 10 USB safemode install again same results. Was able to complete installation from USB but BSOD on restart.

Short of replacing the Motherboard due to the integrated graphics memory (which still tested good in HP system board test), I am at a loss. Please help with any suggestions.

 

I am attempting to do a clean install of Windows 11. (Aurora r13) installation media on a USB thumb drive.

I was able to successfully create the installation media on a USB thumb drive. However, when I performed the steps for the actual installation I got up to the Use a device screen but my thumb drive does not appear on the list. The two options that do appear are: Onboard NIC (IPV4) and Onboard NIC (IPV6). Suggestions? Thanks.