Windows 10: flash card

ihave new computer down loadedfrom old one to flash card how do I down load it to new comp is hip

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

How to: Recover from bad flash with no secondary card or onboard.

Step 1: Turn your PC on normally.
Step 2: Press f8 and go into safe mode.
Step 3: When you're in safe mode, go into device manager and disable your video card.
Step 4: Restart computer(don't go into safe mode).
Step 5: Flash your card like you normally do.
Step 6: Go into device manager and enable your video card.
Step 7: Restart pc and it will work.
I found this method when I flashed my 4870 and restarted pc by accident. This method worked for me when I was using a ATI card, can someone confirm that this method works for Nvidia cards.

I posted this on OCN and I might as well post it on this forum to help out others.

 

Toshiba Flash Card app at shutdown

Thank you for your reply.

I tried your suggestions, but Toshiba Flash Cards wasn't listed anywhere. I did find Toshiba Main Function Keys, and something about Toshiba Utility... but, no Toshiba Flash Cards.

This little problem started after my most recent Windows 10 update (a day ago). The update did take almost 5 hours to finish, and part of the problem was that each time it tried to "restart", the Toshiba Flash Cards app was open, preventing the restart.

Again, thank you.