Windows 10: Flash memory problem

The computer does not recognize the flash memory
I changed several flashes and the same problem I made a format for the device and I downloaded Windows 10 new without any programs and the same problem list worked update for Windows and did not recognize the flash memory but recognized on the external hard disk and any other devices except flash memory


* Moved from Internet Explorer

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Choice of memory and motherboard... a bit stuck...

No one who got some suggestions on this one, huh?

I've found out that the Asus M3A78-T needs to be flashed, so then that motherboard is excluded from my list. Which motherboard and memory should I then go for? Any suggestions?

 

Problem after flashing x800 pro vivo

My best suggestion is that you should follow wizzards flashing guied with the modifined bios flasher that is on this site, but instead of flashing to X800PE use the empty.bin flash to earase all traces of the previous bios flashing and than go back to your original bios. Do the testing see that the card is OK. (Be very very carefull when flashing to empty.bin follow the instruction step by step or you will end up with more problems than before.

Run the 3dmrk03 on endless loop for 1-2 hours see how is the stability, also you can do the artifact scanning with the ATI tool for another hour or two. That way you will make sure that things are fine. (By the way if the 3dmak03 crashes after 1-2 hours that is normal usually does not run for too long anyway so dont worry about that)