Windows 10: Flicking Problem

HI,
I am vaibhav , i am having flicking problem in my pc .when i searched internet i found Troubleshoot screen flickering in Windows 10 - Windows Help
. According to them i have driver problem .When i remove or disable my VGA driver flickering stop and when its reinstalled or enabled flickering is back. my PC specs
CPU - Intel(R) Pentium(R) G2010 @2.80Ghz
Ram - 4 gb (3.71 gb usable)
video card - no
motherboard - Asrock H61M- DGS
Is there any way flickering can be stopped without uninstalling VGA driver

Thanks

:)

 

Pen flick gesture not working in Edge or Explorer Windows 10

Hi,

Unfortunately that did not fix the problem. To be clear:

Flick gesture for pen IS enabled.

Flick gesture DOES work in Googe Chrome.

Flick gesture does NOT work in Microsoft Edge or Internet Explorer.

How do I make Microsoft aware of this issue?

Many thanks,

Ian

 

Flicks in windows ink

I need to turn of the function.

heres what I know:

-I can turn off flicks outside of "INK" and set off windows ink, problem is that i need ink to run the pen sensitivity on the software, but problem is flick is enabled through flick and theirs no visible toggle to turn that off.

>>> Is their a way to turn off flicks from "windows ink"? <<<

theirs one outside windows ink but it isn't working if windows ink is on but i need windows ink on to use pressure sensitivity in a sofware but i need those flicks off.

IS it possible to turn it off.

 

This problem continued in win 7 64 bit pro i had earlier.

 

Vaibhavb: If yours is the same issue ive seen recently I fixed 2 computers (1) where the mouse pointer would constantly flicker, and (2) the other one the screen would flicker every couple of seconds.

I fixed both of them by going into windows recovery and doing a repair install, letting it remove everything and basically starting over, once that was done and booted back to desktop, no more flickering

 

Ok so now i did a clean install of win 10 64 bit pro because of start menu, cortana and edge and the problem is still here . To be clear i make a video
My pc only have Adrock driver + utility , google chrome and bandicam . And btw thanks dafanman

Video-

 

Ok so now i did a clean install of win 10 64 bit pro because of start menu, cortana and edge and the problem is still here . To be clear i make a video
My pc only have Adrock driver + utility , google chrome and bandicam . And btw thanks dafanman

Video-

 

Hi there
Probable cause is you've set the frequency too low in the Monitor / adapters "advanced settings".
People don't often realize it but these also need to be set correctly for modern flat (LCD etc) monitors too. However on older CRT's (is anybody still using those !!) it's absolutely imperative to select the correct frequency. Actually if you still use any of those old clunkers - get rid as LCD monitors are cheap and you will easily save the cost with significantly reduced power consumption.

You should be able to get to the advanced settings in the adapter control. display-->advanced settings.

It should look something like this -- your driver will be different but the screen / options will be similar.





Cheers
jimbo

 

HI
i tried both of the option available to me 60 hzs and 75hzs

 

nvm didnt read properly