Windows 10: Formatted automatically

My device has been formatted automatically . Therefore I need to recover all those files which are important , The format was without my knowledge it had been formatted after a restart . Kindly Guide me through this process as I need all those docs .

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Vista Automatic Updating Error

Automatic Updates isn't currently running.

 

Vista Automatic Updating Error

Resolution Suggestion:

# To resolve this problem, make sure that BITS and the Automatic Updates service are started..

A simple solution but one that works in most circumstances!

1. Click Start, click Run, type services.msc, and then click OK.

2. In the list of services, right-click Automatic Updates, and then click Properties.

3. In the Startup type list, click Automatic, and then click Apply.

4. If Service status is set to Stopped, click Start, and then click OK.

5. Right-click Background Intelligent Transfer Service, and then click Properties.

6. In the Startup type list, click Manual, and then click Apply.

7. If Service status is set to Stopped, click Start, and then click OK.

http://www.updatexp.com/0x80070422.html- source *Smile hope that helps.