Windows 10: Formatting a USB stick from the disk manager

Apparently formatting a USB stick from the disk manager diskmgmt.msc no longer works in version 24H2 of W11 pro. Formatting from File Explorer works correctly. Is this a bug? Have you already experienced this problem?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Chkdsk shows errors after formatting the usb stick

In order to reproduce the problem, I am doing the following steps:

• I put a text file with a single line of text on the usb file.
• I plug in a USB stick to a PC and in the explorer window I go to the usb stick drive.
• I double-click on the text file and open it in notepad.
• I close the notepad.
• I the explorer I go to the one level up and I click the right button on the USB drive and choose the properties->format.
• I formatted the disk with default proposed parameters (FAT32).

The disk is empty after formatting. At the command line prompt window, I type the chkdsk and the letter of the USB drive and I am receiving information that errors have been found (Convert lost chains to files (y/n)?).

I checked it with various usb sticks and different systems (Windows 7, 8, 10) and I got the same results.

***Post moved by the moderator to the appropriate forum category.***

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!