Windows 10: Found random Bluetooth devices in "Devices and other devices" section

/u/Ok-Distribution-4743 · Sep 22, 2020

Today while I was pairing my phone to my PC I saw these Microsoft devices with random string of letters and numbers already paired. Should I be worried about them or leave them as they are?

https://preview.redd.it/z6r4n83eiqo...bp&s=5dcc4c7b1b319aa7cf44cd2db2f65dac06d3809e

https://preview.redd.it/bhiie6efiqo...bp&s=5062167eda32998b23c14d4142dd8e37336cc993

This one popped up right after I paired my mobile-

https://preview.redd.it/fuk26bjhiqo...bp&s=c042c4aa849e8cb2c23a207e2e87695a1b94bc57

https://preview.redd.it/fyr043iiiqo...bp&s=4be38fbea57779b554f40d0e3de75130e2c5fd3a

submitted by /u/Ok-Distribution-4743
[link] [comments]

:)

ameneses54 · Sep 22, 2020

Cannot use bluetooth device

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device
1.2 you choose bluetooth
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it.
1.5 it connects - pairing includes connecting
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected
1.8 the device should also appear in control panel, sounds, playback tab
1.9 the device should also appear in control panel, devices & printers
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers
2.1 right-click on the device & select remove device
2.2 you can now try pairing from scratch again
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device done
1.2 you choose bluetooth done
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
done pairing is succesfull
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it. The device is detected
1.5 it connects - pairing includes connecting ok
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected device is not shown
1.8 the device should also appear in control panel, sounds, playback tab device is not shown
1.9 the device should also appear in control panel, devices & printers device is shown
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers did that and the bluetooth is shown
2.1 right-click on the device & select remove device did that
2.2 you can now try pairing from scratch again did that
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]
yes it's the bluetooth earphone

wrapping it up, there is no way to choose the bluetooth device for playback as this option does not show anywhere (not in the taskbar, not in control panel "sounds" "playback option". I've been wondering if the fact that i have an internal sound card (not the motherboard device) has to do with this situation.
I've never been able to use a bluetooth device. Just to let you know with my dell laptop i did the whole procedure in 5 minutes and it worked perfectly.

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device done
1.2 you choose bluetooth done
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
done pairing is succesfull
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it. The device is detected
1.5 it connects - pairing includes connecting ok
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected device is not shown
1.8 the device should also appear in control panel, sounds, playback tab device is not shown
1.9 the device should also appear in control panel, devices & printers device is shown
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers did that and the bluetooth is shown
2.1 right-click on the device & select remove device did that
2.2 you can now try pairing from scratch again did that
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]
yes it's the bluetooth earphone

wrapping it up, there is no way to choose the bluetooth device for playback as this option does not show anywhere (not in the taskbar, not in control panel "sounds" "playback option". I've been wondering if the fact that i have an internal sound card (not the motherboard device) has to do with this situation.
I've never been able to use a bluetooth device. Just to let you know with my dell laptop i did the whole procedure in 5 minutes and it worked perfectly.

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

Try3 · Sep 22, 2020

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]

4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis

blsnelling · Sep 22, 2020

X800 GTO2 = Unknown Device

I flashed the BIOS on my X800 GTO2 last night and it is listed in the Device Manager as an Unknown Device. Is this normal?

Windows 10: Found random Bluetooth devices in "Devices and other devices" section

Found random Bluetooth devices in "Devices and other devices" section

Found random Bluetooth devices in "Devices and other devices" section

Found random Bluetooth devices in "Devices and other devices" section

Found random Bluetooth devices in "Devices and other devices" section - Similar Threads - Found random Bluetooth

bluetooth devices not found

bluetooth devices not found

problem in my other devices section in my bluetooth settings.

bluetooth device connected but not shown in bluetooth and other devices

Bluetooth and other devices

Bluetooth & other Devices

Bluetooth Device not found.

Bluetooth Device not found

Bluetooth not found on device

Users found this page by searching for:

random numbers and letters bluetooth connected to