Windows 10: Frequent BSOD errors with multiple stop codes on my Laptop running Windows 11

Hi,I am getting multiple BSOD errors intermittently with different stop codes such as:IRQL not less or equal, System thread exception not handled , Kernel security check failure, MEMORY_MANAGEMENTSYSTEM SERVICE EXCEPTIONATTEMPTED TO EXECUTE OF NONEXECUTE MEMORYDPC WATCHDOG VIOLATIONHYPERGUARD_VIOLATIONI have tried running the sfc scan now, running the windows memory diagnostic tool, updating all drivers but nothing seemed to have worked.Attaching minidump zip file,https://drive.google.com/drive/folders/1UnZOrLq0gmlRa1x6HWYOcMI0hICQefe5?usp=sharingLaptop specs:lg gram 16t90p-k.aa

:)

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar:
   
   
   
   

 

Frequent BSOD: CRITICAL_PROCESS_DIED (0xEF) Error on Windows 10 and Windows 11

Hello Microsoft Community,

I've been encountering persistent Blue Screen of Death (BSOD) crashes for the past two months. These issues started on Windows 10 and have continued even after upgrading to Windows 11. I’ve tried multiple solutions, but the problem persists. Here's a summary of what I've done so far:

1. Upgraded from Windows 10 to Windows 11
   
2. Performed a full system reset
   
3. Replaced the RAM
   
4. Ran sfc /scannow and DISM commands to repair system files
   
5. update BIOS
   

System Information:

• Operating System: Windows 11 (upgraded from Windows 10)
  
• Hardware: AMD Ryzen 5 2600,Radeon RX 570, B450 DS3H . Crash Consistency: Frequent BSODs with the error code CRITICAL_PROCESS_DIED (0xEF)
  
• Critical Process: csrss.exe
  

Despite these efforts, I continue to experience BSOD crashes. I've analyzed some of the memory dump files, which consistently point to the critical process csrss.exe and the error code CRITICAL_PROCESS_DIED (0xEF).

Here are link to a few of the minidump files for further analysis:

minidump

Any insights or suggestions on how to resolve this issue would be greatly appreciated.

Thank you!