Windows 10: Frequent BSOD with varying errors

Hello,


I am experiencing frequent BSOD errors while using my desktop running Windows 10. Most frequently the error is a Kernel_Security_Check_Failure however I have also seen "IQR Not Less or Equal" and "KMode exception not handled". None of these error codes are ever accompanied by an alphanumeric code to give more information. I have tried many things to solve the issues including but not limited to: updating drivers, rolling back drivers, sfc scan, the memory diagnostics tool, disk checks for both hard drives, disabling fast boot, removing 3rd party software, cleaning up startup programs, and even resetting the computer while choosing the option to "keep my files". Any input on how to solve this problem would be greatly appreciated.


Is there a preferred way to share my crash dump data?

:)

 

Frequent BSoD's With Varying Errors

I have just recently finished building my computer and have had numerous problems with BSoD's. I have been getting errors about Memory_Corruption, Critical_Structure_Corruption, and IRQL_Not_Less_Or_Equal on Windows 10. Many websites have led me to believe that my RAM is at fault, but after testing with Memtest86 I found that was not the case. I attempted to use Windows "Verifier.exe," but my computer kept crashing every time I used it resulting in a Driver_Verifier_Detected_Error. It may be a faulty driver because I am using an old hard drive from a laptop, but I have had no luck in identifying any drivers that would cause a problem. I found the crash dump and sent it through WinDbg and found the problem was said to be caused by "Memory Corruption (One Bit)."
If there are any further steps I should take to fix this, any help is appreciated.

First Memory Management BSoD:

First Driver Verifier BSoD:

Edit: After running the crash dump from the Memory_Corruption error, WinDbg states for the default bucket ID "WIN8_DRIVER_FAULT" and the process name is InstallManager. Does this mean anything for the error? If it means anything, the hard drive that I am currently using is from an old laptop with much different hardware.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.