Windows 10: Frequent crashes on Windows 11 - BSOD and otherwise

Hi,I have a windows 11 system which beginning of Oct 2023 have frequently started crashing with BSOD.Used to get Clock watchdog timeout error frequently. I updated all my drivers.Ran sfcscan as well as Windows memory diagnostic tool. There were no errors.I also did a re-install of Windows 11 to no avail.Went to the manufacturers website and rechecked the drivers and downloaded it.It seemed that my Nvidia Driver was causing some issue hence i uninstalled it with DDU.Problem seemed to have been sorted for some time, but now it is again acting up by freezing right when the laptop starts up at the

:)

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

Frequent BSOD issue Asus K53sm NVIDIA 630m Windows 10

I would guess that your GPU is faulty, the crashes that are most frequent seem related to the GPU.

I do have a suggestion, although this suggestion is more often seen with 0x9F crashes where drivers are in an inconsistent state for the OS.
Try to change the powerplan, standard there are following plans

1. Powersaver,
2. Balanced, standard selected,
3. High performance

If you didn't change your power plan, you have balanced selected.
Select High performance and see if it makes a difference.

 

Frequent display driver crashes and MEMORY_MANAGEMENT BSOD

Just reinstalled windows, installed things off the included CD from my motherboard (chipset driver, internet driver, net framework, etc.) installed recommended GPU driver, installed firefox, started installing windows updates and installed the game and it still crashes practically instantly. I tried this to see if it would still happen with as few possible variables as possible.

Like a week old

Yeah I applied the "fix" though all it does is turn off a flag that says ryzen is not supported by windows 7, and thus lets you download all the windows 7 updates. I didn't ust it in the current install however, as it shouldn't be essential. I really would rather not use windows 10 but I'll use it as my next troubleshooting step unless someone has a better idea.

How do I see bios settings if I'm supposed to put system on load? Going to grab the others now and edit this post

I'm not sure what's what so I'll just list everything I can see in the PC Health Tab

CPU Vcore: 1.248-1.272V
CPU VDDP 0.900-0.936V
DRAM Channel A/B Voltage 1.212V
+3.3V 3.304V
+5V 5.040V
+12V 12.168V
VCORE SOC 0.852V

Memory Timing Mode is set to Auto, in speccy it shows as: 15-15-15-36 , which is different from what the ram mentions, but I didn't know if turning on XMP was going to improve it, as I heard that the default values are the "guaranteed boot" values, so I assumed they were the safest while setting things up. Was going to start messing with getting RAM to work at expected speeds after things started crashing.