Windows 10: freshly build PC wont boot windows Installation from any medium

Hi!


I just build a new PC and i'm trying to install Windows10. It won't start the installation no matter what i do.

if i put in nothing i get the normal message to out in a bootable device and press any key.

if i connect an external dvd drive with a windows dvd in. i get the message to press any key to boot from disc. then a underscore flashes, the windowslogo appears, the dvd drive winds up briefly, then the underscore is back and flashes in slightly different positions in the upper left corner after some time the windows logo comes back and that's it. even when left over night.

if i create a usb stick, formatted in fat32 using the windows media creation tool i don't even get the windows logo it just freezes immediately.

same for an external hard drive i prepared the same way

i definitely used the uefi version of the boot option and every setting can find is and was set to uefi and not legacy. any help here?

:)

 

Windows 7 wont install drivers

+1

If you having an issue installing a driver that worked before you formatted or wont install on a fresh build, sometimes this means hardware damage

 

Windows 7 wont install drivers

i dont think anyone here understands what your asking either when its nearly a 90% english dominated Tech forum.
Step 1
reinstall windows from scratch
Step 2
install all drivers from the cd that came with the god damn motherboard *common sense*
Step 3
update windows
Step 4
install misc etc crap like flash java etc etc
Step 5
Install GPU drivers
Step 6
go back to using your pc without issue.

 

Clean Install of Windows 10 Fails to Boot without Installation Medium Present

I am trying to create a fresh install of Windows 10 on my laptop's NVMe SSD, however I am unable to do so successfully. (I will eventually add a second SSD to the laptop that contains Linux, but that drive is physically removed from the laptop during the
Windows 10 install.)

Procedure:

1) Format an 8GB USB with the NTFS format and created a fresh copy of the Windows 10 installer.

2) Insert the USB into the target laptop and run through the installation process

3) After the installation process is complete, restart the laptop

Results:

If I leave the USB plugged in, the laptop will boot back into the installer screen and prompts me to install Windows (again).

If I remove the USB, I get an error that no bootable drives are present

If I shutdown the computer and enter the BIOS when I restart with the USB installer plugged in, I have the option in the boot manager to select whether to boot from the USB installation medium or boot into Windows on the SSD.

Problem:

I cannot boot into Windows without the original installation medium (USB) present. It seems that the installer is placing the boot manager on the USB instead of on the SSD!

Mitigation Steps:

• Tried two different USB sticks in case one installer was somehow corrupted.
• Verified in my BIOS that I have SATA set to ACHI
• Verified that I have secure boot disabled
• Reinstalled Windows 10 at least 5 times

Questions:

• What do I need to do to resolve this problem and get a usable version of Windows 10?
• Is there a way to explicitly partition the SSD and select where the bootmanager is placed?
  

Related Forum Posts:

• Windows 10 isn't booting without an USB connected
  
• Reinstalled windows 10 won't boot without disc