Windows 10: FTPM issue after updating my firmware in my Lenovo v15 laptop

FTPM notice is showing up every time I restart my laptop, It 1st appeared after firmware update on my lenovo laptop I have pressed No at first and that booted my pc normally but I can't get rid of that message

:)

 

Headset Not Recognized on Lenovo V15-IGL (Windows 11)

Hi everyone,

I'm having trouble with my Rampage Prestige Virtual 7.1 Surround Gaming Headset (model SN-RW77). When I plug it into my Lenovo V15-IGL running Windows 11, the RGB lights don't turn on, and the headset isn't recognized by my PC. Here's what I've tried:

1. Tried All USB Ports
   
2. Restarted PC
   
3. Driver Installation
   
4. Compatibility Mode
   
5. Device Manager Checks
   
6. Power Management Settings
   

Specifications:

• Lenovo V15-IGL
  
• Windows 11
  
• USB 2.0 and 3.0 ports tested
  

Symptoms:

• RGB lights on the headset do not turn on.
  
• Headset not recognized in Device Manager or sound settings.
  
• Sound continues to come out of the laptop's speakers.
  

Any advice or potential solutions would be greatly appreciated. Thanks!

!!!UPDATE!!! I tried the headset on another pc and i faced the same problem..

UPDATE: It was a software issue, i did reset the pc using Windows 11, version 23H2 (repair version). After installation i plugged in the headset and nothing happened but after 2 minutes i guess the headset finally worked yay!!!!!

 

New CPU installed, fTPM/PSP NV corrupted or fTPM/PSP NV structure changed (NO NEW CPU INSTALLED)

I understand that you're facing a concerning issue with your Asus Strix G15 laptop. The message you're receiving seems related to the Trusted Platform Module (fTPM) or Platform Security Processor (PSP), and it's asking you to reset fTPM due to a perceived change in CPU or corrupted structure.

Here are some steps you can consider:

1. Contact Asus Support:
   
   • Since your laptop is relatively new and likely under warranty, reaching out to Asus support is a good first step. They may have encountered this issue before and can provide specific guidance tailored to your laptop model.
     
2. Check for BIOS/UEFI Update:
   
   • Visit the Asus support website for your laptop model and check if there are any BIOS or UEFI updates available. If so, consider updating the BIOS as it might contain fixes for such issues.
     
3. Press 'Y' to Reset fTPM:
   
   • Some users have reported that pressing 'Y' to reset fTPM resolved the issue for them. However, this might impact BitLocker or encryption settings, so proceed with caution. If you don't use BitLocker or encryption, this might be a viable option.
     
4. Verify BitLocker and Encryption Settings:
   
   • Even if you think you don't have BitLocker enabled, it's worth double-checking. Go to Control Panel > BitLocker Drive Encryption and verify the status of your drives. If it's not enabled, this might not be the root cause.
     
5. Check for Windows Updates:
   
   • Ensure that your Windows operating system is up-to-date. Sometimes, Microsoft releases updates that address compatibility issues with certain hardware configurations.
     
6. Perform a Clean Windows Install:
   
   • If the issue persists and you've exhausted other options, you might consider performing a clean Windows install. This can help rule out software-related issues.
     
7. Backup Important Data:
   
   • Before making significant changes, ensure that you have a backup of your important data. If you need to perform a clean install, you may lose data on the system drive.
     

Remember, if you're not comfortable performing certain steps, it's advisable to wait for guidance from Asus support or seek help from a professional technician to avoid potential data loss or further complications. As you've already reached out to Asus, they should be able to provide more specific assistance based on the details of your laptop's configuration.

 

PS3 and PSP firmware updated

Sony has updated the firmware for its two most recent consoles, with a few improvements for each. The PS3 firmware has been updated to version 1.70, which will enable gamers to play PS1 software purchased from the PlayStation Store (previously only playable on the PSP) and will allow the use of the vibration function of accessories when playing PlayStation and PlayStation 2 titles (not PS3 games unfortunately, but a step forwards). The PlayStation Store still lists all classic titles as being for the PSP, but this may be changed when it’s updated later this week. As for the PSP, the firmware has been updated to version 3.40, with the most noticeable changes being improved support for PlayStation Network titles and a changed method for managing certificates under [Game]. Apparently with the new firmware, gamers can share save data between both consoles allowing PS1 titles to be continued on the move and at home.

Source: DailyTech