Windows 10: Full display issue ?

Hi , I am using lenovo x13 ,after windows 11 update, I can't get the full screen displayed while connecting the device to external monitor. Also it was working with windows 10.How can I fix this please ?

:)

 

Display Issue Please Help

Hi Ahmed,



Thank you for posting your query in Microsoft Community. We appreciate your interest on Windows 10.

I understand the inconvenience you are facing while scrolling down. We are glad to help you.



To serve you better, let me know this:

What exactly happens when you shut down the computer?



I would suggest you to try the following steps and check:

Step 1: Update the Display driver. Please follow the steps given below to update the display driver.

• Click Start and go to Run.
• In the Run prompt, type devmgmt.msc and then click
  OK.
• Device Manager will open.
• In Device Manager expand Display adapters.
• Right-click the display driver and click Update Driver Software.
• Select Search Automatically for Updated Driver Software.

Step 2: Check if there are any updates for display drivers available in Optional Updates; this might fix the issue. Refer to the following steps.

• At the Start screen, type Windows Update.
• Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
• When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.

Step 3: If the issue persists, I would suggest you to uninstall and reinstall the Display driver. Please follow the steps mentioned below to uninstall the display driver.

• Open Device Manager.
• Expand Display adapters.
• Right-click the display card driver and click
  Uninstall.
• Windows will prompt you to confirm the device’s removal. Click OK to remove the driver.
• After the un-installation is complete, reboot your computer as soon as possible.

Computer will load the generic display drivers. Now, please go to the manufacturer’s website, download and install the compatible display card drivers for your computer and check.



Hope this is helpful. Feel free to contact us for further queries. We will be happy to assist.



Regards,

Jenith

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.