Windows 10: Game FPS gets limited at 1 when I install the Intel Graphics DCH Drivers?

Whenever I install the Intel Graphics DCH Drivers available on its website, most games start running at 1 FPS. The problem doesn't seem to be there with the drivers installed from Windows Update. And it's not lag, it feels as if the game FPS has been capped at 1. I want to install the DCH drivers as they have more enhancements. Please help me.

:)

 

Intel® Graphics Control Panel in DCH driver

Hi,

After I updated Windows 10 with 1809 version I lost access to Intel® Graphics Control Panel where I could disable auto screen brightness.

I found out that version brings so called "DCH" drivers for Intel and the Control Panel was replaced with this app

https://www.microsoft.com/en-us/p/i...panel/9ndlclmmtmrc?activetab=pivot:reviewstab

However, I can not launch it says "Intel Graphics Card is not available. Check the driver status and then launch the application."

I found that DCH driver that is installed together with 1809 is missing COM component that contains Strings for localization.

I asked MSI what I should do and they blamed Intel and Microsoft. I asked Intel and they blame Microsoft now. Unfortunately, problem doesn't get solved.

Was anybody able to fix this issue with Intel® Graphics Control Panel ?

 

Correct driver for Intel Graphics 620?

Intel has now gone to DCH drivers whereas your laptop manufacturer doesn't appear have gone that direction. Anyway if you want the latest HP specific drivers you can visit HP's site... or you can decide to go with the Intel DCH drivers.

See these articles....

• DCH Design Principles and Best Practices
• Frequently Asked Questions about Windows* DCH Drivers for Intel® Graphics

Also, be aware that once you choose the DCH drivers, going back to the non-DCH drivers won't be as simple as uninstalling and reinstalling the non-DCH drivers.

Anyway, I'm in the process of deciding whether to go with DCH or stick with Lenovo's non-DCH drivers. With that I would highly suggest you at least read the Intel FAQ's article before deciding which direction to go.

Hope this helps.

 

Windows 10 Update keeps installing old Intel UHD Graphics 630 post DCH driver release

Hi there - I would just like to ask a question regarding updating of Intel hardware beyond November 2018 with the new DCH drivers.

I am having issues in not being able to update my Intel Graphics UHD 630 drivers properly, ever since Microsoft/Intel implemented the new DCH standard.

I have an Intel i7-8700 processor, 16GB RAM and running Windows 10 Pro (1903) with a fully compatible Gigabyte Z370 motherboard (Socket 1151) - it has been working brilliantly
since May last year.

The Intel Driver & Support software has been working perfectly in tandem with Windows Update with no issues, until the DCH drivers were implemented in November 2018.

AS soon as the Intel 630 HD Graphics v25.20.100.6444 was installed, the Intel update software thought it was a customised driver and wouldn't permit it to be updated to the new
May 2019 driver. (v26.20.100.6890).

So, with aid from Intel I manually installed the latest driver by disconnecting my PC from the internet, updating the driver, and lo and behold, the new driver successfully worked,
and all was well.

Until that is, Windows Update was invoked (as it invariably does from time to time) - it forcibly believes that the May 2019 driver is not the most recent version and falls back
to the November 2018 driver, and then face the same problem where it won't update anymore, and thinks it is a customised driver.

I have changed nothing in my hardware or software configuration since the PC was brand new last year. It is purely because of this DCH driver from November 2018. Intel have suggested
that I raise this issue here in the Microsoft forum as the only changes to my system have been the DCH driver which I understand to be a joint authorship between Intel and Microsoft.

I would like to understand if others are experiencing the same problem and how it was averted.

I understand I can force Windows Update not to update drivers (and perhaps ask Intel's updater to do that) - but I have never had to do this before, not until now with this new DCH
standard. I have changed no other hardware.

System specification:

Intel i7-8700 CPU

Intel Graphics UHD 630 (v25.20.100.6444 - forced; otherwise 26.20.100.6890 when I stop Windows update from invoking)

16 GB RAM

Gigabyte Z370N Wifi (note, there are no customised DCH drivers for this motherboard for Intel Graphics or Windows 10 that I could see)

LG OLED65C7T 4K HDR Dolby Vision TV

Yamaha RXA-3070

Windows 10 Pro (64 bit) Build 1903

Best wishes and thanks in advance!

Mike.