Windows 10: Gateway aolder computer

I have the Gateway LX 6810 desktop computer im running windows 10 Professional 64 bit i cannot get the computer to recognize the math co processor. This computer has done this once before but some how corrected itself thi time it has not corrected. this computer is a 2.33ghz quad core cpu 8 gigs of ram so there should be no problems with running windows 10 pro 64bit what can i do to get windows to recognize the math co processor?

:)

 

Limited Connectivity Win 10 (Deafult Gateway Not Avaliable)

Hi John,



This could be an issue with the network configuration for the Ethernet connection on the computer due to incorrect gateway setting as compared to the default gateway.



Is there any third party security software installed on the computer?

Check for the network IP and compare it to the default gateway IP. Follow the steps:

• 
  Press Windows and R key and type cmd. Hit Enter. Type “ipconfig/all” without quotes and hit
  Enter.
  
• 
  Check if the default gateway IP and the network IP (IPV4 or more appropriately IPV6). (Refer to the description provided above in context of the IP matchup).
  

To troubleshoot the issue further, I would suggest you to run the network troubleshooter and check if it finds and fixes any issues with the network settings. Follow the methods:



Method 1: Reset the IP configuration and check if it fixes the issue for us. Follow the steps:

• 
  PressWindows and R key together and type cmd. HitEnter.
  
• 
  Type the following commands and hit Enter:
  

netsh winsock reset

netsh winsock reset catalog

ipconfig /flushdns

ipconfig /release

ipconfig /renew

netsh int ip stop

netsh int ip start



Hope it helps. Get back to us with the updated status. We’ll be glad to assist you further.

 

Win 10 Pro On 2 Home Computers - My Dell Can See My Gateway - My Gateway Can't See My Dell - Why?

Hi, thanks for the informative reply to my 'hidden network computers that should show in Exlorer but don't'
problem.

I followed your step-by-step instructions editting services.msc and I did achieve some,
but not all of my hopeful results. After I finished the Gateway step-by-step editting, I rebooted, and when I checked on 'Network' in Explorer my Gateway laptop finally showed up but
the Dell computer still was absent.

So now my Dell sees my Gateway and itself as well. However the
Gateway only sees itself in Explorer > Network. The Dell still is not seen by Gateway.

We're half way there. I just need to know what I have to tweak to see my Dell in Gateway's Explorer > Network.

Any ideas? Thanks,

William Brown

 

Can't connect to RD Gateway using Windows 10

I am using Windows 10 Pro (1809) and I am trying to use RD Gateway but keep getting error message "can't connect to remote desktop gateway computer." I have seen numerous fix suggestions in other posts and the one I wanted to try was HKCU\Software\Microsoft\Terminal
Server Client, but the terminal service client is not listed in the folder in Pro 10. Any ideas on how to get this RD Gateway to work?