Windows 10: Getting a driver power state failure every 1 to 2 weeks causing me to get a black screen of...

SourceWindowsSummaryHardware errorDate‎31-‎08-‎2024 12:14 AMStatusNot reportedDescriptionA problem with your hardware caused Windows to stop working correctly.Problem signatureProblem Event Name: LiveKernelEventCode: 17cParameter 1: ffffca81e308a040Parameter 2: 7530Parameter 3: 0Parameter 4: 0OS version: 10_0_22631Service Pack: 0_0Product: 768_1OS Version: 10.0.22631.2.0.0.768.100Locale ID: 16393

:)

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.

 

Windows 10 DRIVER POWER STATE FAILURE

The Driver Power State Failure error mostly occur due to a corrupted or outdated driver for any hardware device that your
system may have. This happens because of old or corrupted drivers. Updating the driver is most likely to solve the problem. Sometimes you may need to get rid of the corrupt driver using the safe boot option and do a fresh installation.

Fix Driver Power State Failure Methods

1. Go into Safe Mode and then uninstall the driver
2. Uninstall Driver which is Causing Issue
3. Update the System Drivers
4. Do a System Restore
5. Run System File Check (SFC)
6. Performing BIOS update

For Detailed STeps Visit -

How to Fix Driver Power State Failure Error

 

Power driver state failure

Hello, thanks to contact the Microsoft Community. My name is Israel Torres, I am an Independent Advisor.

Driver Power State Failure errors are usually caused by a computer or device driver going into sleep mode while you’re still using the device. Windows would send a wake signal to the device once it is needed and if the device doesn’t respond in time or at all,
Windows flags a Driver Power State Failure error. The error can be caused either by the driver itself or power settings.

Fix Windows 10 Driver Power State Failure error

Two popular causes of this error were graphics drivers and Wi-Fi card drivers. It makes sense to update both while you’re here.

1. Navigate to Control Panel, Hardware and Sound and Device Manager.

2. Select your Network adapter and/or Display adapter.

3. Right click, select ‘Update Driver Software and Search automatically…’.

4. Reboot your computer and retest.

If a new driver doesn’t work, turn off power saving.

1. Navigate to Control Panel, Hardware and Sound and Power Options.

2. Select ‘Change power settings’ next to the active power plan.

3. Select ‘Change advanced power settings’ text link.

4. Select ‘Change settings that are currently unavailable’.

5. Find Graphics Settings or PCI Express and Link State Power Management and set to Maximum performance, depending on what computer you have.

6. Find Wireless Adapter Settings and set to Maximum performance.

7. Reboot your computer and retest.

If this troubleshooting doesn't work, please follow the steps in the next link:

https://windowsreport.com/driver-power-state-fa...

____________________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.