Windows 10: Getting a lot of BSOD but don't understand the minidump

Getting a lot of BSOD especially when opening/running projects in software development software such as IntelliJ and Unity. I think it is a hardware issue? But I'm having trouble pinpointing to which one.Here is my dumphttps://www.mediafire.com/file/blpc51kts0bwvfg/minidump.zip/fileComputer is a new build, tried memtest86 already.

:)

 

AMD A10-6800K 4.1GHz Quad Core Overclocking possibility

Thanks, have heard this before...is their a step by step procedure to OC using the bios settings you suggest.
i don’t intend pushing this to its limit...but some increase would be great, any suggestions on a good air cooler ?

thanks

 

Why did the startup window get cleared?

I didn't missed any step, the list was gone and gone , even after using lot of programs the programs were not listed in that list.

 

Minidumps not generated after a bluescreen in Win8.1

Lenovo Flex 2-14, windows 8.1 64bit, 4GB RAM, 8SSD-500HDD. All software setup from factory.

The laptop freezes randomly without any pattern and BSOD.

The bluescreen says kernel_data_inpage_error and collecting more info is stuck at 0%. It never progresses and I have to hard power down the laptop. After reboot, there are no minidumps generated(minidump is enabled in adv. settings). Sometime the BSOD also gives another additional info in braces (ntoskernal.sys, volmgr.sys, and few other). occurs at least once every one/two day. Any reason why Minidump is not generated?

Sometimes the laptop also restarts for no reason and shows up the windows boot manager which does not lists the HDD. Is it that HDD is not detected and is it related to the above problem?

The HDD is GPT partioned with UEFI boot enabled. After a lot of factory resets, and even after upgrading to win10, had the BSOD issues.

Someone suggested to change the boot option to legacy. Now I have factory image restored (win8.1) in GPT HDD with leagcy first boot option. I have used the the laptop for a couple of days and the BSOD did not occur till now. Is this a right solution?

Is this a hardware problem because This BSOD occurred in the middle of HDD partitioning after rebooting in AOEMI partition assistant and once while upgrading to win10.(loose cable maybe, but its a brand new laptop and the issue occurred even before putting on any new software) or caused by the boot options?