Windows 10: Getting a multcast message from usb to network

Hi. I have a usb Linux device connected to my windws 10 pc.

It creaties a second network x.x.2.2. My home netwerk is x.x.1.x

Now i want to get a multcast message 230.0.0.10 from the x.x.2.x network tru the windows10 to the x.x.1.x network.


Default gateway is setup to the x.x.2.x win 10 adres in the Linux machine.

Firewalls are down...

Still no multicast message transported.


Any ideas appreciatie


Benno

:)

 

Did our Epson printer get hacked?

Another question, is this on a home network or a work network? The steps @eidairaman1 listed are always a good first step. If this is on a work network you manage, I'd be much more concerned than the home one. It is possible someone is screwing with you, but malware could also be the culprit.

 

Network card not showing

Hi,



Thank you for contacting Microsoft Community.



In order to help you better, could you please confirm a couple of things

• 
  Are you using router?
  
• 
  Are you getting any error message?
  
  
  

Is you are using router then I suggest you to reset the router and check if the issue persist.

Also I suggest you to update the Network Adapter driver. Here is the steps:

• 
  Press Windows+X key on your desktop and select
  Device Manager.
  
• 
  Locate Network drivers, expand, right click and click
  on Update.
  
  Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.
  
  
  

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.