Windows 10: Getting a Windows 11 BSOD while system is in low power state

While my laptop is in a low power state screen if off but can wake up via keyboard/mouse the system will BSOD. I'm running a 64bit version of Windows 11 home. I am providing the minidump below, but it appears that the wcmsvc.dll is causing the BSOD possibly due to another driver. Any help would be appreciated! Thank you******************************************************************************** ** Bugcheck Analysis **

:)

 

Driver Power State Failure (ntoskrnl.exe+22092e ) BSOD

Hi Ayan,

I suggest you to follow the steps given in the link below and check if it helps you.

Redirecting

Let us know the status of the issue.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

In Windows 11 power-saving mode, clicking the Windows Focus prompt on the lock screen will cause a system crash.

Problem description: As the title suggests.

Steps to reproduce:

1. Enter Windows 11 power-saving mode.
   
2. Click the Windows Focus prompt on the lock screen.
   

Expected result: The login screen should appear and after logging in, the browser should automatically open to view content.

Actual result: The system crashes.

Device information:

• Windows 11 version: 22H2 (22621.1413)
  
• Device: Lenovo Xiaoxin 14 Pro 2021
  
• CPU: AMD Ryzen 7 5800H
  

Other information:

• When plugged in, the system automatically turns off power-saving mode and cannot be turned on manually. The function works normally.
  
• When unplugged, turn off power-saving mode and the function works normally.
  
• When unplugged, turn on power-saving mode and the system crashes.