Windows 10: Getting BSOD continously and not sure why

Hi , I have been facing the BSOD issue and I am not sure why it is happening. I have tried the basic troubleshooting steps and they don't seem to help. I have tried to restore my PC but I am not able to do so because I keep running into the BSOD. Here is the dump file: https://drive.google.com/file/d/14c1__OtqZFvKV9V2BwjkvlKdKZKOSotU/view?usp=sharingAny assistance would be appreciated. Thanks, Rohit

:)

 

Getting BSoD continously with bugcheck

When I open my computer after a shutdown, I keep getting BSoD continously.

After a short while, it stopped and my computer works just fine.

I checked Event Viewer and here is the bugcheck code.

The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8050cdf1dfa, 0xffff97832bb3e4b0, 0x0000000000000000)

Can somebody please help me figure out what the code means and how can I fix this?

Lot of thanks!

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.