Windows 10: Getting BSOD everyday with different errors on a newly built desktop

Hi,I recently built my pc with the following parts and have been getting blue screen of death everytime I use my pc. Atleast 2 times a day with a new "stop code" and new "what failed".Here is my pc configuration:1. Intel i5 14600K2. MSI Pro B760M-A Wifi Motherboard3. MSI RTX 4070 Ventus 2X4. G.Skill Ripjaws S5 CL36 16GBx2 RAM5. SN770 SSD - Primary6. WD Blue - HDD7. Windows 11 ProI have run MemTest, DSKCHK, SFC, DISM, Verifier but didnt' come across a single error. Here is the link of mini dumb files of recent BSODs, please help me with identifying the problem and solution for it:Link: Mini Dum

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSoDS on newly built PC

Since it is my first time, i did not know that there is a vendors approved list. and it is not. is that the reason for my BSODS?

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile