Windows 10: Getting BSOD screen

I have been getting BSOD with different reasons in few days the most recent was KMODE_EXCEPTION_NOT_HANDLED wit what failed :- dxgmms2.sys and before that it was SYSTEM_SERVICE_EXCEPTION. Link for the windows Minidump as follows :-https://drive.google.com/file/d/1VyHHmH9JajnNew8od9WwFeKUZAYFR75D/view?usp=sharing

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Windows 7 - Blue Screen Of Death (BSOD) help?

@ BluDKlot ur answer is already listed in this post....Read it over it's actually a simple fix..
and yes please get ur own thread

@ Bulgarianboy92 did you remove ur OC as Sneekypeet suggested and did that work?