Windows 10: Getting BSOD, Specifically after closing my game

I've been running my PC for a long time with no problems


I had an OC of 4.9 ghz @ 1.38 v


I had 32 gb of ram


2080 gtx EVGa gpu


I just recently started getting BSOD = Critical Process Died after closing "Escape from Tarkov"


Now this BSOD isnt consistent, like I can open the game and play for awhile and close it.. no BSOD


I've updated my Bios


I've checked my ram and ran windows memory diagnostic and memtest both passed


I took out 2 sticks of ram, still BSOD


I replaced the 2 inside and still got the BSOD


I did a fresh windows install, still got the BSOD


https://drive.google.com/file/d/1MCJwkpa6Z8dJoEBP8H0-M3BieNOWhZOW/view?usp=sharing

I uploaded my minidump from my most recent BSOD


Idk what's wrong with my PC


The most recent step i've done is completely remove the OC from my CPU

:)

 

BSOD When playing games

Hi Jackson,

Thank you for contacting Microsoft Community.

Please share the information requested below:

• Does the BSOD occur while playing a particular game?
• Is the game downloaded from Windows Store?

I suggest you to update the Graphic Card drivers by following the steps provided below and check if it helps.

• Press Windows key + X, select Device Manager.
• Expand Display Adapters.
• Right click on the driver and select Update Driver Software.
• Follow the on-screen prompts to update.

Refer the link below for more information:

http://windows.microsoft.com/en-us/windows-10/troubleshoot-blue-screen-errors

Hope this helps. Keep us posted on the status for further assistance.

 

Laptop goes to sleep when the LID is closed while playing the game.

Hello,

I realize the inconvenience you are facing in your laptop regarding the sleep mode while playing game. We will help you.

To assist you better, I suggest you to answer the below questions.

• Have you connected the external monitor to the Laptop?
• Did you make any recent changes prior to the issue?
• Are you facing this issue specifically when playing the specific Game?
• Are you facing this issue after any recent updates installed?

This issue might have caused due to the power settings for the closing of LID is set to sleep mode.

I suggest you to follow the below steps and check if it helps.

• Press Windows + X keys and select the Control Panel.
• Select Power options by searching in search box.
• Right side select Change Plan setting next to the power plans.
• Select the Change advanced Power plan settings.
• Under the list select and expand Power buttons and lid.
• Select Turn off the display under the drop down of setting.
• Click Apply. Ok.
• Close the LID and Check if the issue resolves.

Please post to us with the results to help you better.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.