Windows 10: Getting drivers for a Galaxy S105g

I recently needed a laptop with an old-fashioned serial port for some legacy equipment.I have a couple of old laptops. Both were given to me second-hand after the previous owners upgraded and both have XP Prne I've been using since college mostly to play DVDs on my porch outside, and occasionally play music or read fanfic. I have no trouble connecting my Samsung Galaxy s105g phone, that I acquired last summer around July. I had previously connected a Galaxy S9 and an HTC One X+.However, it has no serial port and now has about 5 minutes of battery life. It's an Acer Aspire 5570Z. I've been a

:)

 

Windows 7 driver for Samsung Galaxy 8

When I plugged my Galaxy 8 into my Windows 10 desktop it recognized it immediately, but when I plugged the Galaxy 8 into my Windows 7 laptop it only registered an unknown device. Even when I asked it to search for the driver in Windows it still said it
was an unknown device. I tried the Samsung site and downloaded a "developers" driver, but that did not help. There must be a driver somewhere in Windows for the Samsung Galaxy S8 on my Windows 7 laptop system. Any suggestions or links will be greatly appreciated.
Thanks.

*** Email address is removed for privacy ***

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it