Windows 10: Getting multiple BSOD's

Good Evening, I have been getting multiple BSOD's, but have been unable to find out why. There are multiple potential causes, so I just attached the minidumps of the most recent crashes.Ask me any specific information about my PC excluding personal that you might need :minidumps: https://drive.google.com/drive/folders/1Dz2hyoMdotH9WeWZ1xy8lok32UxkVpvx?usp=sharingThank you for reading

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Getting multiple different BSOD crashes tried MANY things

I cannot do the last three steps because they take too long and my computer BSOD's every time.

Images:














All of the rows in the health tab said ok.

New crash dmp files.
Dump files.

 

Multiple BSOD

Bug Check 0x1A: MEMORY_MANAGEMENT

Bug Check 0x1A MEMORY_MANAGEMENT - Windows drivers | Microsoft Docs

MEMORY_MANAGEMENT BSODs, accompanied by occasional app crashes/GPUTDR.

MEMORY_MANAGEMENT BSODs, accompanied by occasional app crashes/GPUTDR.

The relevant Parameter appears to be 0x41284 which means, A PTE or the working set list is corrupted, which in itself means nothing to most of us poor Windows users. I still wonder if this is not just bad RAM?

Is it possible to remove one stick of RAM for testing purposes and then test all sticks one at a time (that's is you have multiple sticks of RAM, otherwise it is a daft suggestion on my part).