Windows 10: Getting WHEA_UNCORRECTABLE_ERROR with no OS

I get the WHEA error while installing win 10, but while it's in the getting files ready stage it crashes.I can't access windows since it's not installed yet.I can access cmd X: Sources and tried sfc but it says Windows resource protection cannot perform the requested operation..I haven't overclocked or touched the bios at allPlease adviseMy laptop details:HP Omen 17cb0xxx16 gb ramCPU i7 9th gen

:)

 

How to fix Whea_Uncorrectable_Error

Hi Alexander,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

Do let us know the following to assist you better with this issue:

• What is the complete error message along with the error code of this issue?
• Have you made any changes to the operating system prior to this issue?
• From when are you facing this issue?
• What is the make and model of your device?
• Are you able to boot the device to desktop?

I would like to inform that the WHEA_UNCORRECTABLE_ERROR bug check has a value of 0x00000124. This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture
(WHEA).

I suggest you to refer to the below article, try the troubleshooting steps mentioned and check if it helps.

Refer: Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR

Hope it helps. If the issue still persist reply to the post with the required information and updated status of this issue for further assistance.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it