Windows 10: Getting WHEA_UNCORRECTABLE_ERROR

Hello, I've been getting WHEA_UNDETECTABLE_ERROR for quite a while now and wanted to finally get it fixed since it's started to be annoying.My specs:Motherboard: Z690 Steel Legend/D5CPU: i7-13700K 3400Mhz 16 CoresGPU: RTX 3080SSD: Samsung 980 PRO 2TB Samsung 970 PRO 1TBRAM: Corsair Vengeance 2x 16 GB DDR5 4800MHzI've tried:Updating BIOS, Updated Drives for GPU, Reseated CPU+RAM, Reapplied thermal paste in case it was a heat issue.What i've noticed:I've noticed that when my pc idles for more than even 1-2 minutes, it gives me that crash WHEA_UNDETECTABLE_ERROR but when it's under mor

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

How to fix Whea_Uncorrectable_Error

Hi Alexander,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

Do let us know the following to assist you better with this issue:

• What is the complete error message along with the error code of this issue?
• Have you made any changes to the operating system prior to this issue?
• From when are you facing this issue?
• What is the make and model of your device?
• Are you able to boot the device to desktop?

I would like to inform that the WHEA_UNCORRECTABLE_ERROR bug check has a value of 0x00000124. This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture
(WHEA).

I suggest you to refer to the below article, try the troubleshooting steps mentioned and check if it helps.

Refer: Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR

Hope it helps. If the issue still persist reply to the post with the required information and updated status of this issue for further assistance.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it