Windows 10: Graphics card won't display anything on the monitor

I am having trouble with my display adapter, it was working just a few days ago but now it has an error. It says Windows has stopped this device because it has reported problems. Code 43 and if I go to event details it has an error: Device PCI\VEN_1002&DEV_6818&SUBSYS_32501682&REV_00\4&2209af9f&0&0008 had a problem starting.Driver Name: display.infClass Guid: {4d36e968-e325-11ce-bfc1-08002be10318}Service: BasicDisplayLower Filters: Upper Filters: Problem: 0x1FProblem Status: 0xC01E043

:)

 

usb monitors using graphics card

Hi isaac177,

Thank you for writing to Microsoft Community Forums.

1. May I know the model number of AOC display monitor?
2. Is this the first time that you are trying to setup the display using HDMI?

You can try to use an adaptor (USB/HDMI or VGA as the card has 3 slots) to connect to monitor. I would also suggest you to get in touch with Nvidia to know more about this as there can be output issues while using adaptors and your Graphic card (GTX
1660 Ti) might not work as expected.

I suggest you to refer this
NVidia support link, and check if that helps.


Regards,

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

graphics card problems

Hi,

Your computer makes a noise or beeps from your internal speaker because it failed to detect the graphics card. What we can suggest is for you to try cleaning your graphics card with a pencil eraser. Here are the steps below:

• Turn your computer off.
• Pull out your video/graphics card.
• Rubbed the cold contacts with soft pencil eraser.
• Connect your video/graphics card back to the computer.

Kindly note that this is just a temporary fix. If the case still continues, I suggest that you contact your graphics card's manufacturer.

Let us know how it goes.