Windows 10: Handbrake during transcoding CPU Temperature: Plug-In(88~97°C) and using only battery...

submitted by /u/notafanofdcs
[link] [comments]

:)

 

CPU temperature issue in Windows 10 upgrade

Hi,

I have upgraded the windows 7 to windows 10 its look good. But I noticed though, that system temperature is rising really quickly after system startup and CPU temp don't go below 50°C and fluctuating second by second and it goes
to 95°C as well.

• Only 10-15 minutes after startup CPU temperature hits 90°C when system is running totally idle
• If I start browsing the internet, temperature jumps to 95°C
• Task managers show system process between 18-20% of CPU; all other processes are between 0-1%
• All drivers are up to date

tell me how to solve this issue otherwise it will harm my computer.

Second thing pls tell me how to make windows 10 recovery disk so that in future I will kept for urgency.

 

CPU Temperature

I have tried to follow different sets of instructions on how to reveal the CPU temperature gauge. They either fail to match what I see on the screen or fail to tell me what function key to press when I eventually get to the list of options. Can anyone
clarify this for me. (I'm investigating the possibility that instability on my Sony All-in-one PC is being caused by high temperature).

 

Plugged in but battery does not charge

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.